056.10030.00-C

Overview

The Astrodyne TDI 056.10030.00-C is a feed-through capacitor filter designed for high-current applications. It features a rated current of 100 A and supports voltages up to 250 VAC. The component utilizes threaded terminals for secure mounting and connection. Its physical dimensions are 1.063 inches in diameter by 1.929 inches in length (27.00 mm x 49.00 mm). The unit employs an M8 thread size for installation. This axial-style filter provides high insertion loss across a wide frequency range from kHz to GHz, ensuring effective electromagnetic interference suppression.

Feature Summary

• Provides high insertion loss across a broad frequency spectrum ranging from kilohertz to gigahertz
• Engineered with threaded terminals for robust mechanical and electrical connections
• Capable of handling high continuous current loads up to 100 amperes

Applications

• Industrial power distribution systems requiring EMI filtering
• Medical equipment power supplies demanding strict noise reduction
• Telecommunications infrastructure power conditioning
• Military and aerospace electronic systems

Procurement Notes

Verify the specific voltage rating and current capacity requirements against the official datasheet before procurement. Confirm that the M8 threaded terminal configuration matches the existing panel or chassis design constraints. Ensure compliance with relevant safety standards such as UL 1283 or IEC 60929 if required by the end application. Check RoHS3 compliance status for environmental regulations. Validate that the physical dimensions fit within the designated enclosure space without interference.

Selection Notes

Select this component when high current handling capability is critical alongside broadband noise suppression. The threaded terminal design offers superior reliability compared to solder-only connections in high-vibration environments. Consider the physical size constraints as the axial form factor requires adequate clearance. Evaluate the need for high insertion loss in both common-mode and differential-mode scenarios. Ensure the operating voltage does not exceed the 250 VAC rating under all conditions.

Part Context

This part belongs to the Astrodyne TDI feed-through capacitor series, which specializes in power line filtering solutions. These components are engineered to integrate directly into power cables or panels, acting as low-pass filters. The series typically includes various current ratings and terminal options to suit diverse industrial and commercial needs. Feed-through capacitors combine capacitance and inductance properties to attenuate high-frequency noise effectively while passing DC or low-frequency AC power.

Replacement Considerations

Direct substitutes must match the 100 A current rating, 250 VAC voltage rating, and M8 threaded terminal interface. Verify that alternative parts offer comparable insertion loss characteristics across the kHz to GHz range. Ensure physical dimensions allow for direct replacement without modifying mounting hardware. Confirm that the substitute meets the same safety certifications and RoHS compliance standards.