05S1P5-K2BS3

Overview

The Rosenberger 05S1P5-K2BS3 is a precision N-Type matching attenuator designed for radio frequency applications. It operates within a frequency range of 0 Hz to 18 GHz and maintains a characteristic impedance of 75 Ohms. The device provides an attenuation value of approximately 5.72 dB and is rated for a power handling capacity of 1 Watt. Constructed as an in-line module, it features male and female connectors to facilitate series connection in RF signal chains.

Feature Summary

• Provides precise attenuation for signal level adjustment in RF systems
• Designed for high-frequency operation up to 18 GHz
• Constructed as an in-line module with standard N-Type interfaces

Applications

• RF signal chain calibration and testing
• Attenuation in 75-ohm video or broadcast transmission lines
• Laboratory measurement setups requiring fixed attenuation

Procurement Notes

Verify the specific attenuation tolerance and connector gender configuration against project requirements before ordering. Confirm that the 75-ohm impedance aligns with the system design, as this component is not compatible with standard 50-ohm infrastructure without adapters. Check for current manufacturing status as availability may vary.

Selection Notes

Select this component when a fixed attenuation value is required in a 75-ohm environment. Ensure the operating frequency does not exceed 18 GHz and that the power levels remain below 1 Watt. Compare against other Rosenberger attenuator models if different impedance values or connector types are needed.

Part Context

This part belongs to Rosenberger's line of RF interconnect components, specifically categorized under matching attenuators. It serves as a passive device used to reduce signal amplitude without introducing significant distortion. The N-Type interface ensures compatibility with standard coaxial cabling systems designed for frequencies up to 18 GHz.

Replacement Considerations

Direct substitutes may include other Rosenberger N-Type attenuators with similar 75-ohm impedance and attenuation values. Verify mechanical dimensions and electrical performance specifications to ensure interchangeability in existing assemblies.