0ZRV0016FF1E

Ptc Resettable Fuses Overview

The Bel Fuse 0ZRV0016FF1E is a ceramic PTC resettable fuse designed for through-hole radial mounting. It features a disc package with a hold current of 160 mA and a trip current of 320 mA. The device supports a maximum voltage of 277 VAC and 305 VDC, with an interrupt rating of 277 VAC. It operates within a temperature range of -40°C to +85°C and exhibits a typical resistance of 1.5 ohms.

Ptc Resettable Fuses Feature Summary

• Provides automatic circuit protection by increasing resistance during overcurrent conditions
• Utilizes ceramic polymer technology for reliable thermal response
• Designed for radial through-hole PCB mounting applications

Ptc Resettable Fuses Applications

• Power supply input protection
• Telecommunications equipment circuits
• Consumer electronics power lines
• Industrial control system protection

Ptc Resettable Fuses Procurement Notes

Verify the specific datasheet version to confirm electrical tolerances and mechanical dimensions. Ensure the selected component matches the required voltage and current ratings for the target application. Cross-reference manufacturer documentation for compliance certifications and recommended soldering profiles to guarantee assembly integrity.

Ptc Resettable Fuses Selection Notes

Select this component when a radial through-hole solution is required for moderate current protection. Compare the hold current against normal operating loads to prevent nuisance tripping. Evaluate the maximum voltage rating against the circuit's peak potential. Consider the physical disc size constraints on the printed circuit board layout before finalizing the design.

Ptc Resettable Fuses Part Context

This part belongs to the 0ZRV series of PPTC devices from Bel Fuse. The series offers various hold currents and voltage ratings tailored for different circuit protection needs. It serves as a reusable alternative to traditional fuses in applications requiring manual reset capabilities after fault clearance.

Ptc Resettable Fuses Replacement Considerations

Direct substitutes must match the 160 mA hold current, 277 VAC voltage rating, and radial disc form factor. Verify that any replacement maintains equivalent trip characteristics and thermal performance. Consult official cross-reference lists for approved equivalents.