10114829-10115LF

Headers, Male Pins Overview

The Amphenol ICC (FCI) part number 10114829-10115LF is a Minitek® 1.25mm series header connector designed for board-to-wire applications. It features a single row of 15 positions with a 0.049-inch (1.25mm) mating pitch. The connector utilizes through-hole vertical termination and includes a four-wall shroud for alignment. Contacts are made of phosphor bronze with tin plating, rated for 1A at 125V. Constructed from liquid crystal polymer (LCP), it operates within a temperature range of -40°C to 105°C and meets UL94 V-0 flammability standards.

Headers, Male Pins Feature Summary

• Single-row pin header configuration with a 1.25mm pitch for compact board-to-wire interconnections
• Four-wall shrouded design providing mechanical alignment and protection during assembly
• Through-hole vertical termination style suitable for standard PCB mounting processes
• Tin-plated phosphor bronze contacts ensuring reliable electrical conductivity

Headers, Male Pins Applications

• General electronic equipment requiring board-to-wire connections
• Consumer electronics assemblies utilizing low-profile headers
• Industrial control modules needing vertically mounted connectors
• Communication devices requiring standardized 1.25mm spacing

Headers, Male Pins Procurement Notes

Verify the specific contact count matches the required circuit design, as this component is a 15-position header. Confirm that the through-hole vertical orientation aligns with the PCB layout constraints. Ensure the tin-plated contact finish is compatible with the mating wire or cable terminals. Check that the LCP insulation material meets the thermal requirements of the soldering process. Validate that the four-wall shroud does not interfere with adjacent components on the assembly.

Headers, Male Pins Selection Notes

Select this connector when a single-row, vertically mounted header is required for board-to-wire applications. The 1.25mm pitch offers a balance between density and ease of handling compared to finer pitches. The four-wall shroud is essential if precise alignment of mating cables is necessary. Consider the tin plating for general-purpose use rather than high-corrosion environments where gold might be preferred. Ensure the operating temperature range of -40°C to 105°C fits the environmental conditions of the target application.

Headers, Male Pins Part Context

This component belongs to the Minitek® 1.25mm family produced by Amphenol ICC (FCI). The series is characterized by its low profile and cost-effective design for various interconnect needs. Similar parts in this family vary by position count, such as the 6-position 10114829-10106LF, but share the same 1.25mm pitch and structural features. The manufacturer provides EDA models and drawings to support integration into electronic designs.

Headers, Male Pins Replacement Considerations

Direct substitutes within the same series include other position variants like 10114829-10106LF. Cross-brand replacements must match the 1.25mm pitch, single-row configuration, and vertical through-hole mounting. Verify that any alternative maintains the four-wall shroud design and similar electrical ratings.