10AS032E1F27E1HG

Overview

The Altera 10AS032E1F27E1HG is an Arria 10 SX SoC FPGA featuring a dual-core ARM Cortex-A9 processor and 320,000 logic elements. It integrates 17.4 Mbit of embedded memory and supports up to 384 I/Os within a 780-pin FBGA package. The device includes 12 transceivers capable of 17.4 Gb/s data rates and operates at a maximum frequency of 1.5 GHz. Core voltage ranges from 870 mV to 980 mV, with a standard operating point of 950 mV. It functions within a commercial temperature range of 0°C to +100°C.

Feature Summary

• Integrates dual-core ARM Cortex-A9 processors for system-level control alongside programmable fabric
• Provides high-density logic resources with over 100,000 adaptive logic modules for complex designs
• Supports high-speed serial communications via integrated transceivers reaching 17.4 Gb/s
• Consolidates significant embedded memory capacity to reduce external component requirements

Applications

• High-performance test and measurement instrumentation requiring low latency processing
• Industrial automation systems utilizing flexible I/O standards and protocol agility
• Signal processing platforms consolidating DSP blocks and custom IP on a single chip

Procurement Notes

Verify the specific suffix E1 against official datasheets to confirm it denotes the commercial temperature grade (0°C to +100°C) rather than industrial variants. Confirm the F27 designation corresponds to the 780-pin FBGA package dimensions. Ensure compatibility with Intel Quartus Prime software versions supporting the Arria 10 family before procurement.

Selection Notes

Select this model when design requirements exceed the capacity of smaller Arria 10 devices but do not necessitate the higher density of the SX 640 or GX families. The 780-pin package offers a balance between pin count and board space. Verify that the required number of transceivers aligns with the twelve available in this specific configuration.

Part Context

This component belongs to the Arria 10 SX series, which targets cost-sensitive applications requiring substantial logic density and embedded processing capabilities. It sits below the higher-end Stratix 10 devices while offering more performance than Cyclone families. The series is designed for applications balancing performance with power efficiency.

Replacement Considerations

Direct replacements within the same package and feature set are limited due to specific suffix variations. Consider the 10AS032E1F27I1HG if an extended industrial temperature range (-40°C to +100°C) is acceptable. Other Arria 10 SX models require schematic and layout modifications.