2131D2*5GSE

Headers, Male Pins Overview

The Marutsuelec 2131D2*5GSE is a vertical male pin header connector designed for through-hole mounting. It features a 10-position configuration with a 0.100 inch (2.54 mm) pitch. The insulator material is specified as PBT containing 30% glass fiber, rated UL 94V-0. Electrical characteristics include a maximum contact resistance of 20 milliohms at DC 100mA and a minimum insulation resistance of 1000 megohms at DC.

Headers, Male Pins Feature Summary

• Vertical orientation for board-to-board or cable connections
• Through-hole termination method for secure mechanical attachment
• High-glass-content thermoplastic insulator for thermal stability

Headers, Male Pins Applications

• General electronic equipment interconnects
• Industrial control system wiring
• Consumer appliance circuit boards

Headers, Male Pins Procurement Notes

Verify the specific pin count matches the required ten-position configuration before integration. Confirm that the through-hole footprint aligns with the PCB design specifications. Ensure the operating environment temperature does not exceed the thermal limits of the PBT insulator material to maintain structural integrity during soldering and operation.

Headers, Male Pins Selection Notes

Select this component when a vertical, ten-pin connection is required with standard 2.54 mm spacing. The high glass content in the insulator provides superior dimensional stability compared to standard plastics. Verify compatibility with mating female contacts and ensure the current rating requirements are met by the terminal design.

Headers, Male Pins Part Context

This part belongs to the 2131D series of headers from Marutsuelec. Variations within this series typically differ by position count, such as two or twenty positions, while maintaining consistent pitch and mounting style. This specific model represents the ten-position variant within that standardized product line.

Headers, Male Pins Replacement Considerations

Compatible substitutes must match the 2.54 mm pitch, vertical orientation, and ten-position count. Insulator material properties should be comparable to ensure similar thermal performance. Verify that the terminal plating and current capacity meet or exceed the original specifications.