260-006-RS-CR

Overview

The E-Z LOK 260-006-RS-CR is a press-in threaded insert designed for installation in thermoset and thermoplastic materials. It features a reverse slot design to prevent rotation during molding or post-molding insertion. The component has an internal thread size of 6-32 and is constructed from brass with a chrome plating finish. Key dimensions include a length of 1/4 inch, an outer diameter of approximately 0.250 inches, and a base width of 0.188 inches (3/16 inch).

Feature Summary

• Reverse slot geometry prevents rotation during installation.
• Chrome-plated brass construction for corrosion resistance.
• Compatible with both thermoset and thermoplastic substrates.

Applications

• Post-molding installation in plastic housings.
• Thermoset plastic component assembly.
• Thermoplastic part fastening points.

Procurement Notes

Verify the specific suffix 'CR' indicates the chrome finish on the brass substrate. Confirm the reverse slot design matches the application requirements for preventing rotation. Ensure the 6-32 thread pitch aligns with the intended fastener specifications. Check compatibility with the specific plastic material type being used.

Selection Notes

Select this insert when a non-rotating solution is required for plastic components. The chrome finish provides additional environmental protection compared to standard brass. The reverse slot design simplifies installation by eliminating the need for tools to hold the insert stationary. Consider the 1/4 inch length for adequate pull-out strength in the target material thickness.

Part Context

This part belongs to the E-Z Lok E-Z Press series of threaded inserts specifically engineered for plastic applications. The series includes various thread sizes and materials, with the reverse slot variant offering enhanced stability during the molding process. These inserts are widely used in electronics and automotive plastic assemblies where reliable metal threading is needed within polymer structures.

Replacement Considerations

The 260-006-RS is the uncoated brass equivalent. Verify if the chrome plating is critical for the application environment. Other manufacturers may offer similar reverse-slot inserts, but dimensional accuracy must be confirmed against the original E-Z Lok specifications.

FAQ

What is the function of the reverse slot?

The reverse slot prevents the insert from rotating during installation into plastic materials, ensuring proper alignment and secure seating without requiring additional holding tools.

Is this insert suitable for thermoplastics?

Yes, the E-Z Press series is designed for use in both thermoset and thermoplastic materials.