2KBP06-BP

Overview

The MCC 2KBP06-BP is a single-phase glass-passivated bridge rectifier rated for 2.0 A average forward current and 600 V maximum repetitive peak reverse voltage. It utilizes KBPL surface-mount packaging with solder pad termination, measuring approximately 14.22 mm to 15.24 mm in length and 10.60 mm to 11.68 mm in width. The device supports a maximum DC blocking voltage of 600 V and withstands a 60 A peak forward surge current for an 8.3 ms half-sine pulse. Operating temperatures range from -55°C to +165°C, with a maximum forward voltage drop of 1.2 V at 2.0 A.

Feature Summary

• Glass passivated die construction provides mechanical strength and stability against thermal shocks.
• Epoxy casing meets UL 94 V-0 flammability ratings for enhanced safety.
• Designed specifically for printed circuit board mounting applications.

Applications

• General purpose AC to DC conversion circuits
• Power supply input stages
• Bridge rectification in consumer electronics

Procurement Notes

Verify authenticity by purchasing directly from Micro Commercial Components or authorized distributors to avoid counterfeit parts. Confirm the -BP suffix indicates lead-free and RoHS compliance. Check for the -HF suffix if halogen-free requirements are necessary. Ensure the component status is reviewed as it may be marked not recommended for new designs.

Selection Notes

Select this component when a 600 V rating and 2.0 A continuous current capacity are required for surface-mount implementations. Compare the 1.2 V forward voltage drop and 60 A surge capability against circuit demands. Consider the extended +165°C operating temperature limit for high-thermal environments. Verify that the KBPL footprint matches the PCB layout constraints.

Part Context

This part belongs to the 2KBP005 through 2KBP10 series of 2.0 Amp glass-passivated bridge rectifiers. The series covers voltage ratings from 50 V to 1000 V. The 2KBP06 variant specifically addresses the 600 V requirement within this standardized product line manufactured by Micro Commercial Components.

Replacement Considerations

The datasheet explicitly recommends using the KBP2005G-BP through KBP210G-BP series as alternatives. These G-series components serve as updated replacements for the 2KBP family.

FAQ

What is the maximum junction temperature for the 2KBP06-BP?

The maximum operating and storage temperature range extends up to +165°C.

Does the 2KBP06-BP meet RoHS standards?

Yes, the "-BP" suffix designates that the component is lead-free finish and RoHS compliant.

What is the typical reverse leakage current at rated voltage?

The maximum DC reverse current is specified as 10 µA at 25°C and 0.5 mA at 125°C when rated at the DC blocking voltage.