2W005M

Bridge Rectifier Overview

The GeneSiC Semiconductor 2W005M is a single-phase silicon bridge rectifier rated for 2.0 amperes average forward current and a maximum repetitive peak reverse voltage of 50 volts. It features a molded plastic case with pure tin-plated leads suitable for printed circuit board mounting. The device supports a peak forward surge current of 50 amperes under JEDEC testing conditions. Electrical characteristics include a maximum instantaneous forward voltage of 1.1 volts at 2.0 amps and a typical thermal resistance of 40 °C/W from junction to ambient. Operating temperature ranges extend from -55°C to +125°C.

Bridge Rectifier Feature Summary

• UL Recognized component
• Surge overload ratings up to 50 amperes peak
• High temperature soldering capability

Bridge Rectifier Applications

• Printed circuit board assembly
• Single phase half wave rectification
• Resistive or inductive load circuits

Bridge Rectifier Procurement Notes

Verify the specific part number against official datasheets to ensure correct voltage and current ratings. Confirm lead-free status and UL recognition requirements for your application. Check thermal derating curves if operating near maximum ambient temperatures. Ensure proper PCB layout for heat dissipation given the specified thermal resistance values.

Bridge Rectifier Selection Notes

Select this component when a 50V peak reverse voltage rating is required for 2A applications. Consider the 50A surge capability for transient protection needs. Evaluate thermal management strategies based on the 40 °C/W junction-to-ambient resistance. Verify compatibility with high-temperature soldering processes up to 260°C.

Bridge Rectifier Part Context

This component belongs to the 2W series of single-phase silicon bridge rectifiers manufactured by GeneSiC Semiconductor. The series includes variants with different voltage ratings, such as the 2W01M through 2W10M. These devices share similar mechanical constructions and electrical performance profiles, differing primarily in their maximum repetitive peak reverse voltage specifications.

Bridge Rectifier Replacement Considerations

Direct substitutes must match the 2.0A current rating and 50V reverse voltage specification. Verify equivalent thermal resistance and package dimensions for PCB compatibility. Ensure replacement parts maintain UL recognition if required by safety standards. Cross-reference surge current capabilities to guarantee adequate transient protection.