358L625B3C2T

Oscillators Overview

The CTS-Frequency Controls 358L625B3C2T is a Voltage Controlled Crystal Oscillator (VCXO) operating at a fundamental frequency of 62.5 MHz. It utilizes LVDS output signaling and requires a 2.5V supply voltage. The device features enable/disable functionality with maximum supply currents of 65mA when active and 22mA in disabled state. Frequency stability is rated at ±50ppm, with an absolute pull range of ±50ppm. It operates within a temperature range of -20°C to 70°C. The component is housed in a compact 6-SMD, no-lead package measuring 5.00mm x 3.20mm x 1.30mm.

Oscillators Feature Summary

• Generates stable 62.5 MHz clock signals using LVDS differential output for high-speed data transmission integrity.
• Incorporates crystal-based resonance with voltage-controlled tuning capabilities for precise frequency adjustment.
• Supports power management through dedicated enable and disable control pins to reduce energy consumption during idle periods.

Oscillators Applications

• High-speed serial communication interfaces requiring precise clock synchronization.
• Data acquisition systems needing low-jitter timing references.
• Telecommunications equipment utilizing LVDS signal standards.

Oscillators Procurement Notes

Verify the specific ordering suffix against the manufacturer's official datasheet to ensure correct output type and packaging configuration. Confirm that the required frequency tolerance and pull range meet the system design specifications before finalizing procurement. Ensure compatibility with the 2.5V supply voltage and check thermal requirements for the intended operating environment.

Oscillators Selection Notes

Select this component when LVDS output is required for noise immunity in high-frequency applications. Consider the ±50ppm stability and pull range relative to system jitter budgets. Evaluate the surface-mount package dimensions for PCB layout constraints. Compare against other series members if different output logic levels or temperature ranges are needed.

Oscillators Part Context

This oscillator belongs to the 358P/L series from CTS-Frequency Controls, designed for general-purpose timing applications. It shares the same physical footprint and electrical interface characteristics as other models in the family, differing primarily in nominal frequency and specific performance tolerances defined by the part number suffix.

Oscillators Replacement Considerations

Direct substitutes include other 358L series VCXOs with matching 62.5 MHz frequency, LVDS output, and 6-SMD package. Verify pinout compatibility and electrical parameters such as supply voltage and current consumption before substitution.