402F307XXCJR

Crystals Overview

The CTS-Frequency Controls 402F307XXCJR is a surface-mount fundamental mode quartz crystal resonator operating at 30.72 MHz. It features a load capacitance of 9 pF and a frequency stability of ±15 ppm. The component has an equivalent series resistance (ESR) of 80 Ohms and operates within a temperature range of -20°C to +70°C. It is housed in a compact 4-SMD, no-lead package with dimensions of 2.00mm x 1.60mm and a maximum height of 0.55mm.

Crystals Feature Summary

• Fundamental mode operation for precise timing applications
• Compact 4-SMD surface-mount package design
• Stable frequency output with ±15 ppm tolerance

Crystals Applications

• Low-power embedded system timing sources
• Communication equipment clock generation
• Microcontroller oscillator circuits

Crystals Procurement Notes

Verify the specific suffix requirements against the manufacturer's official datasheet to ensure compatibility with your circuit design. Confirm that the 9 pF load capacitance matches your oscillator circuit specifications. Check current availability status as distribution channels may vary. Ensure compliance with RoHS3 standards if required by your assembly process.

Crystals Selection Notes

Select this component when a 30.72 MHz fundamental mode crystal is required in a small 4-SMD footprint. Consider the 80 Ohm ESR limit for oscillator circuit design. Verify that the -20°C to +70°C operating range meets your environmental conditions. Compare load capacitance requirements with other available options in the 402 series.

Crystals Part Context

This part belongs to the CTS 402 Series of surface-mount crystals. The series offers various frequencies and packages optimized for consumer electronics and industrial applications. The 402F307XXCJR specifically targets applications requiring stable clock signals in space-constrained designs.

Crystals Replacement Considerations

Direct substitutes include 402F307XXCJT from CTS-Frequency Controls. Other similar parts in the 402 series may be considered if electrical parameters match exactly. Always verify pinout and mechanical dimensions before substitution.