416F50013ALR

Overview

The CTS-Frequency Controls 416F50013ALR is a 50 MHz fundamental mode crystal resonator designed for surface-mount applications. It features a frequency tolerance of ±10 ppm and a stability of ±30 ppm over the operating temperature range of -10°C to +60°C. The component utilizes a 12 pF load capacitance and exhibits an equivalent series resistance (ESR) of 60 Ohms. It is housed in a compact 4-SMD, No Lead package with dimensions of 1.60mm x 1.20mm and a maximum height of 0.45mm.

Feature Summary

• Fundamental oscillation mode operation
• Compact 4-SMD no-lead surface-mount footprint
• RoHS compliant construction

Applications

• General purpose clock signal generation
• Microcontroller oscillator circuits
• Communication interface timing references

Procurement Notes

Verify the specific ordering suffix against the manufacturer's current documentation to confirm exact electrical parameters and packaging configuration. Suffixes such as ALR, AKT, or AAR may indicate variations in load capacitance, tolerance, or reel quantity. Ensure the selected variant matches the circuit design requirements for load capacitance and frequency stability before procurement.

Selection Notes

Select this component when a 50 MHz fundamental frequency with ±10 ppm initial tolerance is required. The 12 pF load capacitance must match the oscillator circuit design. Consider the -10°C to +60°C temperature range suitability for the target environment. The 60 Ohm ESR value should be compatible with the driving circuit's capability.

Part Context

This part belongs to the CTS 416 Series of surface-mount crystals. The series offers various frequencies and packages optimized for space-constrained electronic designs. The 416F50013ALR specifically targets applications requiring precise timing at 50 MHz within a small form factor.

Replacement Considerations

Cross-reference with other 416 series variants such as 416F50013AKT or 416F50013AAR if available, ensuring identical frequency, load capacitance, and package dimensions. Verify that any substitute maintains the same ±10 ppm tolerance and 60 Ohm ESR specifications.