532CA000400DG

Pin ConfigurableSelectable Oscillators Overview

The Skyworks Solutions Inc. 532CA000400DG is a pin-configurable standard crystal oscillator (XO) from the Si532 series, designed for high-performance clock generation. It operates on a single 3.3V supply voltage with a minimum of 2.97V and maximum of 3.63V. The device provides dual frequency outputs of 80MHz and 100MHz in CMOS format, ensuring signal integrity for digital circuits. Frequency stability is rated at ±50ppm across the operating temperature range. The component supports enable/disable functionality via an OE pin and is housed in a compact 6-SMD, no-lead package measuring 7.00mm x 5.00mm x 1.80mm.

Pin ConfigurableSelectable Oscillators Feature Summary

• Dual-frequency output capability providing selectable 80MHz or 100MHz signals
• Pin-configurable design allowing flexible integration into various circuit layouts
• CMOS output format compatible with standard digital logic interfaces
• Integrated enable/disable control for power management optimization

Pin ConfigurableSelectable Oscillators Applications

• High-speed data communication systems requiring precise clock synchronization
• Network infrastructure equipment utilizing standard timing references
• Digital signal processing units needing stable frequency sources
• Embedded systems with multiple clock domain requirements

Pin ConfigurableSelectable Oscillators Procurement Notes

Verify the specific frequency selection (80MHz vs 100MHz) against the datasheet configuration options before ordering. Confirm that the CMOS output voltage levels match the receiving logic family requirements. Ensure the 3.3V supply rail meets the specified tolerance limits to maintain the stated ±50ppm stability. Check for any required external components as defined in the official application notes.

Pin ConfigurableSelectable Oscillators Selection Notes

Select this model when dual-frequency flexibility is required within a single footprint constraint. The Si532 series offers robust performance for applications demanding low jitter and high stability. Consider the 7x5mm package dimensions for PCB layout planning. Verify that the CMOS output drive strength is sufficient for the trace length and load capacitance of the target application without additional buffering.

Pin ConfigurableSelectable Oscillators Part Context

The 532CA000400DG belongs to the Si532 family of pin-configurable oscillators manufactured by Skyworks Solutions. This series is engineered to replace discrete crystal and resonator combinations, simplifying board design. The part is actively produced and available through authorized distributors, supporting mass production volumes for consumer electronics and industrial applications.

Pin ConfigurableSelectable Oscillators Replacement Considerations

The 532CA000400DGR is a parameter-equivalent alternative offered by Skyworks Solutions. Both parts share identical electrical specifications and pinout configurations. The primary difference lies in the packaging format; verify reel versus cut-tape requirements based on assembly line capabilities.