532DB000753DGR

Pin ConfigurableSelectable Oscillators Overview

The Skyworks Solutions Inc. 532DB000753DGR is a standard clock oscillator from the Si532 series, housed in a 7 mm x 5 mm SMD package. It operates at a nominal voltage of 3.3 V with a supply range of 2.97 V to 3.63 V. The device provides dual frequency outputs of 155.52 MHz and 161.132812 MHz with a stability of 61.5 PPM. It features CML output format, an enable pin on pin 2, and supports frequencies from 10 MHz to 1417 MHz. The operating temperature range is -40°C to +85°C.

Pin ConfigurableSelectable Oscillators Feature Summary

• Dual frequency output capability for flexible system timing requirements
• CML output format optimized for high-speed digital interfaces
• Pin 2 enable functionality for power management control

Pin ConfigurableSelectable Oscillators Applications

• High-speed data communication systems requiring precise clocking
• Telecommunications infrastructure equipment
• Network switching and routing hardware

Pin ConfigurableSelectable Oscillators Procurement Notes

Verify the specific dual frequency configuration (155.52 MHz and 161.132812 MHz) against your design requirements before procurement. Confirm that the CML output interface matches your receiver inputs. Ensure the 3.3V supply voltage aligns with your board's power distribution network. Check the lead time and minimum order quantities with authorized distributors as availability may vary.

Pin ConfigurableSelectable Oscillators Selection Notes

Select this component when dual frequency generation is required within the Si532 family. Compare the 61.5 PPM stability against stricter jitter specifications if available. Consider the CML output format compatibility versus LVPECL or LVDS options found in other variants. Verify the 7x5mm footprint fits your PCB layout constraints compared to other package sizes in the series.

Pin ConfigurableSelectable Oscillators Part Context

This part belongs to the Skyworks Si532 standard clock oscillator series. It shares the same 7 mm x 5 mm package and general form factor with other models like the 532EC and 532FC series. However, it differs in output format (CML), supply voltage (3.3V), and specific frequency capabilities, distinguishing it from lower voltage or different output type variants.

Pin ConfigurableSelectable Oscillators Replacement Considerations

Direct substitutes are not explicitly confirmed in public documentation. Cross-reference with other Si532 dual-frequency models such as 532EC000813DGR or 532AA000104DGR only if output format and voltage levels are compatible.