5502.17.0032

RF Power Dividers/Splitters Overview

The Huber+Suhner 5502.17.0032 is a Wilkinson power splitter designed for RF applications. It operates within a frequency range of 0.694 GHz to 2.7 GHz and features N-type connectors. The component maintains a 50 Ohm impedance and supports a maximum power handling capacity of 50 W. Key electrical specifications include an insertion loss of 6.9 dB, typical isolation of 20 dB, and a return loss of 17 dB. The device is rated for a maximum operating temperature of +60°C.

RF Power Dividers/Splitters Feature Summary

• Wilkinson topology ensures high port-to-port isolation
• N-type connector interface for secure mounting
• Capable of handling up to 50 W power levels

RF Power Dividers/Splitters Applications

• RF signal distribution networks
• Power splitting in communication systems
• Test and measurement equipment setups

RF Power Dividers/Splitters Procurement Notes

Verify the specific connector gender and mating compatibility with existing N-type interfaces before integration. Confirm that the operational environment remains within the specified +60°C thermal limit. Ensure the system power requirements do not exceed the 50 W rating to maintain performance integrity and prevent damage.

RF Power Dividers/Splitters Selection Notes

Select this component when a split ratio requiring approximately 6.9 dB insertion loss is acceptable. The N-type interface dictates mechanical compatibility constraints. Consider the 20 dB isolation specification for crosstalk-sensitive environments. Evaluate the 50 W power rating against peak signal loads.

RF Power Dividers/Splitters Part Context

This part belongs to the Huber+Suhner RF passive component portfolio, specifically focusing on power dividers and combiners. It utilizes standard N-type connector geometry, distinguishing it from SMA or QMA variants found in other product lines. The design targets mid-frequency RF bands.

RF Power Dividers/Splitters Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation. Cross-referencing requires matching the N-type interface, 50 Ohm impedance, and 0.694-2.7 GHz frequency range.