5PB1108PGGI8

Overview

The Renesas Electronics 5PB1108PGGI8 is a high-performance LVCMOS clock buffer featuring a 1:8 fan-out ratio. It supports maximum input and output frequencies of 200 MHz with a typical propagation delay of 2.7 ns. The device operates on a single supply voltage ranging from 1.71 V to 3.465 V. It is housed in a 16-TSSOP package (4.40 mm wide) and is rated for an operating temperature range of -40°C to +85°C. This component functions as a clock distribution buffer designed for low skew and jitter applications.

Feature Summary

• 1:8 LVCMOS fan-out clock buffer
• Maximum frequency support of 200 MHz
• Supply voltage range of 1.71 V to 3.465 V
• 16-TSSOP surface-mount package

Applications

• Clock distribution in industrial systems
• Data acquisition signal conditioning
• Communication equipment timing networks

Procurement Notes

Verify the specific suffix 'PGGI8' against official Renesas documentation to confirm the tape-and-reel packaging configuration, as standard datasheets may list the tube-packaged variant (e.g., PGGI). Confirm RoHS compliance status and moisture sensitivity level (MSL 1) requirements prior to procurement to ensure compatibility with assembly processes.

Selection Notes

Select this component when a 1:8 LVCMOS fan-out is required within the 1.71 V to 3.465 V supply range. Ensure the design accommodates the 16-TSSOP footprint. For lower pin counts, consider the 5PB1102 or 5PB1106 series; for higher counts, evaluate the 5PB1110 series. Verify that the 200 MHz maximum frequency meets system timing requirements.

Part Context

The 5PB1108 belongs to the Renesas 5PB11xx family of high-performance LVCMOS clock buffers. This family provides various fan-out ratios (1:2, 1:6, 1:8, 1:10) using a consistent electrical specification profile. The 5PB1108 specifically bridges the gap between lower-density buffers and higher-density solutions like the 5PB1110.

Replacement Considerations

The 5PB1108PGGK is listed as a parameter-equivalent alternative by distributors. Verify if the 'K' suffix denotes a different package type or revision before substitution.