— IC芯片 | 连接器 | 传感器 | 被动器件 —
Product Detailed Parameters
- Description:IC SRAM 9MBIT PARALLEL 119PBGA
- Series:-
- Mfr:Renesas Electronics Corporation
- Package:Tape & Reel (TR)
- Memory Type:Volatile
- Memory Format:SRAM
- Technology:SRAM - Synchronous, SDR (ZBT)
- Memory Size:9Mbit
- Memory Organization:256K x 36
- Memory Interface:Parallel
- Clock Frequency:-
- Write Cycle Time - Word, Page:-
- Voltage - Supply:3.135V ~ 3.465V
- Operating Temperature:-40°C ~ 85°C (TA)
- Mounting Type:Surface Mount
- Package / Case:119-BGA
- Supplier Device Package:119-PBGA (14x22)
- Access Time:8.5 ns
Download product information
Overview
The 71V65703S85BGI8 is a synchronous static random-access memory (SRAM) integrated circuit manufactured by Renesas Electronics Corporation. It features a storage capacity of 9 megabits, organized as 256K words by 36 bits. The device utilizes a parallel interface with an access time of 8.5 nanoseconds and operates on a single 3.3-volt power supply within the range of 3.135 to 3.465 volts. It is housed in a 165-pin CABGA package measuring 13x15 millimeters and supports an operating temperature range from -40°C to +85°C.
Feature Summary
- Zero Bus Turnaround (ZBT) technology eliminates dead bus cycles during read-to-write or write-to-read transitions.
- Includes registers for address, data-in, and control signals to optimize data throughput.
- Flow-through output architecture provides direct data access without additional output registers.
Applications
- High-speed digital signal processing systems
- Network infrastructure equipment requiring low-latency buffering
- Industrial control systems demanding wide data word widths
Procurement Notes
Verify component authenticity through authorized channels due to potential counterfeit risks. Confirm RoHS compliance status as specific suffixes may vary. Check for End-of-Life notices or Product Change Notifications regarding substrate or labeling updates. Ensure thermal management aligns with the specified industrial temperature range during installation.
Selection Notes
Select this component when a 36-bit data width is required for system compatibility. The ZBT feature is essential for applications needing minimal turnaround latency between bus directions. Verify that the PCB layout supports the 165-pin CABGA footprint dimensions. Ensure the design accommodates the 3.3V I/O voltage levels for proper interfacing.
Part Context
This part belongs to the 71V65703 family of high-performance synchronous SRAMs. It shares architectural similarities with other ZBT devices but is distinguished by its specific 256K x 36 organization and 8.5 ns speed grade. The CABGA package variant offers enhanced thermal performance compared to standard BGA options.
Replacement Considerations
- 71V65703S85BQGI
- IS64LF25636A-7.5B3LA3-TR
FAQ
Does the 71V65703S85BGI8 include output data registers?
No, the device features a flow-through output architecture without output data registers.
What is the maximum operating frequency at 8.5 ns access time?
The datasheet specifies an access time of 8.5 ns; specific clock frequencies depend on the burst mode configuration and timing parameters defined in the official specification.
ChipApex | Global Electronic Components Supplier








