74AUP1G08FW4-7

Overview

The 74AUP1G08FW4-7 is a single two-input positive AND gate from the advanced ultra-low power (AUP) CMOS logic family. It operates within a supply voltage range of 0.8V to 3.6V and features Schmitt trigger inputs for slow signal tolerance. The device provides ±4mA output drive at 3.0V, with typical propagation delays ranging from 2.2ns to 5.1ns at 3.3V with a 5pF load. It includes IOFF circuitry for partial power-down applications and meets ESD protection standards exceeding 2000V HBM and 1000V CDM.

Feature Summary

• Advanced Ultra-Low Power (AUP) CMOS technology designed for extended battery life in portable devices
• Schmitt trigger action on all inputs ensures tolerance for slower input rise and fall times
• IOFF circuitry disables outputs during power-down to prevent damaging backflow current
• Standard push-pull output configuration supporting wide operating temperature ranges

Applications

• Battery-powered consumer electronics such as tablets, e-readers, and MP3 players
• Mobile communication devices including cell phones and personal navigation/GPS systems
• Portable computing hardware like notebooks, netbooks, and ultrabooks
• Computer peripherals including hard drives, SSDs, and optical disc drives

Procurement Notes

Verify the specific package code FW4 corresponds to the X2-DFN1010-6 footprint when sourcing. Confirm that the ordering suffix -7 indicates standard tape and reel packing. Ensure compatibility with RoHS 3 and halogen-free requirements if mandated by your design specifications. Cross-reference the datasheet revision DS35150 Rev. 7 for the most current electrical characteristics.

Selection Notes

Select this component when low static power consumption is critical alongside moderate speed requirements. The AUP series offers lower dynamic power dissipation compared to older logic families. Verify that the required input transition rates align with the Schmitt trigger hysteresis capabilities. Consider the available package options if board space constraints dictate a smaller footprint than the X2-DFN1010-6.

Part Context

This part belongs to the 74AUP1Gxx series of single-gate logic ICs manufactured by Diodes Incorporated. The '1G' designation indicates a single functional gate, while '08' specifies the AND logic function. The AUP family targets ultra-low power applications, distinguishing it from the broader 74HC or 74HCT series through its optimized voltage range and reduced leakage currents.

Replacement Considerations

Check for alternative packages within the same logic family, such as 74AUP1G08SE-7 (SOT353) or 74AUP1G08FS3-7 (X2-DFN0808-4), which share identical electrical performance but differ in physical dimensions.