74HC11D-Q100J

Overview

The Nexperia 74HC11D-Q100J is a triple 3-input AND gate qualified to AEC-Q100 Grade 1. It operates within a supply voltage range of 2.0 V to 6.0 V and supports ambient temperatures from -40 °C to +125 °C. The device utilizes CMOS technology for low power dissipation and high noise immunity, featuring latch-up performance exceeding 100 mA per JESD 78 Class II Level B. Inputs include clamp diodes for interfacing with voltages exceeding VCC. ESD protection exceeds 2000 V (HBM) and 1000 V (CDM). Propagation delay ranges from 10 ns to 30 ns depending on voltage and temperature.

Feature Summary

• Automotive qualification in accordance with AEC-Q100 Grade 1 standards
• Wide supply voltage range supporting operation from 2.0 V to 6.0 V
• High noise immunity with robust latch-up performance exceeding 100 mA
• Input clamp diodes enabling interface to voltages in excess of VCC

Applications

• Automotive engine control units
• Body control modules
• Transmission control units

Procurement Notes

Verify the specific ordering code matches the required package variant, as the Q100 suffix denotes automotive qualification but does not specify the physical package type. Confirm that the D suffix corresponds to the SO14 package if that form factor is required for the design. Ensure the component meets the specific temperature grade requirements for the target application environment before finalizing procurement.

Selection Notes

Select this component when a triple 3-input AND gate is required for automotive environments. The HC logic family provides CMOS input levels suitable for standard digital interfaces. Consider the wide operating voltage range and extended temperature specifications (-40 °C to +125 °C) when designing for harsh conditions. Verify that the propagation delay characteristics meet the timing constraints of the system at the intended supply voltage.

Part Context

This part belongs to the Nexperia 74HC11-Q100 series, which includes both HC and HCT variants. The 'D' suffix indicates the SO14 plastic small outline package (SOT108-1), while 'PW' would indicate the TSSOP14 package. The series is designed for applications requiring high reliability and compliance with automotive electronics council standards.

Replacement Considerations

Direct replacements must maintain the triple 3-input AND gate function and AEC-Q100 Grade 1 qualification. Verify pinout compatibility between SO14 packages. Check that the replacement device supports the same voltage range and temperature specifications.