74HC365PW,118

Overview

The Nexperia 74HC365PW,118 is a hex buffer and line driver featuring non-inverting outputs with three-state control. It operates within a supply voltage range of 2.0 V to 6.0 V and supports an ambient temperature range from -40 °C to +125 °C. The device utilizes a 16-lead TSSOP plastic thin shrink small outline package (SOT403-1). Key electrical characteristics include a maximum static supply current of 8 µA at 25 °C and up to 160 µa at the upper temperature limit. Propagation delay typically ranges from 9 ns to 30 ns depending on voltage conditions.

Feature Summary

• Provides six independent non-inverting buffers with three-state output capability controlled by active-low enable inputs.
• Features input clamp diodes allowing interface to voltages exceeding the supply rail using current limiting resistors.
• Offers high noise immunity and low power dissipation inherent to CMOS technology.
• Includes electrostatic discharge protection exceeding 2000 V for the human body model.

Applications

• Carry-over address/data bus buffering
• Clock drivers
• Bus-oriented architectures

Procurement Notes

Verify that the specific ordering suffix matches the required package type and tape-and-reel specifications. Confirm the logic family variant aligns with system voltage requirements, as HC and HCT versions differ in input threshold levels. Ensure environmental compliance documentation is obtained prior to final design integration.

Selection Notes

Select this component when a wide supply voltage range is necessary for flexible system interfacing. The TSSOP package is suitable for applications requiring higher pin density compared to standard SO packages. Consider the propagation delay specifications relative to the system clock speed to ensure timing margins are met under worst-case operating conditions.

Part Context

This part belongs to the 74HC series of high-speed CMOS logic devices manufactured by Nexperia. It is functionally similar to other hex buffers but specifically provides non-inverting logic with three-state outputs. The PW suffix indicates the TSSOP16 package configuration, distinguishing it from the SO16 variant which uses the D suffix.

Replacement Considerations

The 74HCT365PW,118 serves as a compatible alternative if TTL-compatible input thresholds are required instead of CMOS levels. Other manufacturers may offer equivalent hex buffers with three-state outputs, though pinouts and electrical characteristics must be verified against the official datasheet.