74LV08AS14-13

Inverter Gates Overview

The 74LV08AS14-13 is a quadruple 2-input AND gate manufactured by Diodes Incorporated. It operates within a supply voltage range of 2.0V to 5.5V and features standard push-pull outputs capable of sinking or sourcing 12mA at VCC = 4.5V. The device includes IOFF circuitry for partial power-down applications, preventing damaging current backflow. Inputs are tolerant to 5.5V, allowing use in mixed-voltage environments with 3.3V or 5V drivers. Propagation delay ranges from 5.9ns to 13.8ns depending on voltage and load. It is housed in an SO-14 package.

Inverter Gates Feature Summary

• Provides four independent 2-input AND gates with standard push-pull outputs
• Supports partial-power down operation via IOFF circuitry to prevent backflow
• Inputs accept up to 5.5V, enabling voltage translation between 3.3V and 5V systems
• Features Schmitt trigger action at all inputs for improved noise immunity

Inverter Gates Applications

• General purpose logic circuits
• Power down signal isolation
• PCs, networking equipment, notebooks, ultrabooks, and netbooks
• Computer peripherals, hard drives, and CD/DVD ROM drives
• TV, DVD, DVR, and set-top boxes

Inverter Gates Procurement Notes

Verify the specific suffix 'S14' confirms the SO-14 surface-mount package type required for your PCB layout. Confirm that the '-13' suffix corresponds to the 2500-unit tape and reel packaging format specified in the ordering information. Ensure design compatibility with the 2.0V to 5.5V operating voltage range and check that input/output voltage tolerances match your system's mixed-voltage requirements.

Inverter Gates Selection Notes

Select this component when designing circuits requiring multiple AND functions in a single package with mixed-voltage interface capabilities. The wide supply voltage range supports both 3.3V and 5V logic families. Consider the IOFF feature if the design requires safe operation during partial power-down states. Verify that the SO-14 package dimensions fit the available board space and that the propagation delays meet the timing constraints of the target application.

Inverter Gates Part Context

This part belongs to the 74LV08A series of quadruple 2-input AND gates produced by Diodes Incorporated. The 'S14' designation indicates the SO-14 small outline package variant, while the '-13' suffix specifies the tape and reel packaging quantity. This series is designed for low-power CMOS applications requiring robust performance across a wide voltage range.

Inverter Gates Replacement Considerations

The 74LV08AT14-13 serves as a direct functional substitute, differing only in its TSSOP-14 package instead of the SO-14 form factor.