74LV08D,118

Inverter Gates Overview

The Nexperia 74LV08D,118 is a quad 2-input AND gate manufactured by Nexperia USA Inc. It operates within a supply voltage range of 1.0 V to 5.5 V and features CMOS low power dissipation. The device includes input clamp diodes for interfacing with voltages exceeding VCC. It complies with JEDEC standards JESD8-7, JESD8-5, JESD8C, and JESD36. ESD protection exceeds 2000 V (HBM) and 1000 V (CDM). Latch-up performance exceeds 100 mA per JESD 78 Class II Level B. Propagation delay ranges from 7 ns to 26 ns depending on voltage. Operating temperature spans -40 °C to +125 °C.

Inverter Gates Feature Summary

• Wide supply voltage range from 1.0 V to 5.5 V
• CMOS low power dissipation
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Optimized for low voltage applications: 1.0 V to 3.6 V

Inverter Gates Applications

• Low voltage logic circuits
• Mixed voltage systems
• TTL-to-LV interface applications

Inverter Gates Procurement Notes

Verify the ordering suffix matches the required package type. Confirm the temperature grade aligns with system requirements. Check RoHS compliance status. Ensure ESD handling procedures are followed during assembly. Validate pinout compatibility with existing PCB footprints.

Inverter Gates Selection Notes

Select this component for designs requiring wide voltage operation up to 5.5 V. Consider the SO14 package for surface mount applications. Evaluate propagation delay specifications against circuit timing constraints. Assess power dissipation limits under maximum load conditions.

Inverter Gates Part Context

The 74LV08D,118 belongs to the 74LV series of logic gates. It provides four independent 2-input AND functions in a single package. The device is designed for general-purpose digital logic applications. It supports direct interface with TTL levels between VCC = 2.7 V and VCC = 3.6 V.

Inverter Gates Replacement Considerations

Check for equivalent parts from other manufacturers offering similar logic functions and package types. Verify electrical characteristics match original specifications. Ensure mechanical dimensions are compatible with existing board layouts.