74LV132AS14-13

Inverter Gates Overview

The 74LV132AS14-13 is a quadruple 2-input NAND gate with Schmitt trigger inputs manufactured by Diodes Incorporated. It operates within a supply voltage range of 2.0V to 5.5V and features standard push-pull outputs capable of sinking or sourcing 12mA at VCC = 4.5V. The device includes I_OFF circuitry for partial power-down applications, preventing damaging current backflow. Inputs are tolerant to 5.5V, allowing compatibility with 3.3V or 5V drivers for voltage translation. Propagation delay ranges from 3.9ns to 16.5ns depending on load capacitance and voltage.

Inverter Gates Feature Summary

• Schmitt Trigger Action at All Inputs
• I OFF Supports Partial-Power Down Operation
• Inputs or Outputs accept up to 5.5V

Inverter Gates Applications

• General Purpose Logic
• Power Down Signal Isolation
• Voltage Translation Applications

Inverter Gates Procurement Notes

Verify the specific package suffix 'S14' corresponds to the SO-14 footprint required for your PCB layout. Confirm that the -13 suffix indicates tape and reel packaging with a quantity of 2500 units per reel. Ensure the design accounts for the specified operating temperature range of -40°C to +125°C. Check RoHS compliance documentation if environmental regulations apply to your manufacturing process.

Inverter Gates Selection Notes

Select this component when noisy environments require the noise immunity provided by Schmitt trigger inputs. It is suitable for mixed-voltage systems where 5.5V tolerant inputs interface with lower voltage logic. Consider the 12mA drive capability for moderate load requirements. Verify that the propagation delay characteristics meet the timing constraints of your specific digital application.

Inverter Gates Part Context

This part belongs to the 74LV series of low-voltage CMOS logic devices. It provides four independent NAND gates in a single package. The 74LV family is designed for operation across a wide voltage range, bridging the gap between traditional 5V logic and modern low-voltage systems. The AS14 designation specifically identifies the surface-mount SO-14 package variant.

Inverter Gates Replacement Considerations

Check datasheets for other manufacturers offering 74LV132 equivalents. Verify pinout compatibility and electrical specifications such as propagation delay and output current. Ensure the replacement supports the same Schmitt trigger input characteristics and 5.5V tolerance.