74LV241D,112

Overview

The 74LV241D,112 is an octal non-inverting buffer and line driver manufactured by NXP USA Inc. It features 3-state outputs controlled by separate enable inputs (1OE active LOW, 2OE active HIGH). The device operates within a supply voltage range of 1.0 V to 3.6 V and accepts TTL input levels between 2.7 V and 3.6 V. It utilizes a SO20 plastic small outline package with a body width of 7.5 mm. Propagation delay is typically 8.0 ns at 3.3 V with 15 pF load capacitance.

Feature Summary

• Octal non-inverting buffer/line driver architecture with dual 3-state output control
• Optimized for low-voltage applications ranging from 1.0 V to 3.6 V
• Compatible with TTL input levels when supply voltage is between 2.7 V and 3.6 V
• High ESD protection exceeding 2000 V per HBM standard

Applications

• Bus-oriented transmissions
• Clock buffering and distribution
• Memory and signal switching applications

Procurement Notes

Verify the specific ordering suffix '112' corresponds to the tape and reel packaging format required for automated assembly processes. Confirm that the SO20 package dimensions align with the target PCB footprint constraints. Ensure the component meets RoHS compliance standards applicable to the final product deployment region.

Selection Notes

Select this component for designs requiring high-density octal buffering in low-voltage environments. It serves as a direct pin-compatible replacement for 74HC241 and 74HCT241 devices. Consider the propagation delay specifications relative to system timing requirements when operating at varying supply voltages.

Part Context

This part belongs to the 74LV series of low-voltage CMOS logic devices. It is functionally equivalent to the Philips Semiconductors 74LV241. The manufacturer transitioned from Philips to NXP, maintaining the same logical functionality and pinout configuration for legacy design continuity.

Replacement Considerations

• 74LV241N
• 74LV241DB
• 74LV241PW

FAQ

How are the 3-state outputs controlled?

The outputs are controlled by two independent enable inputs: 1OE is active LOW, and 2OE is active HIGH.

What is the maximum supply voltage?

The recommended operating condition maximum supply voltage is 3.6 V.