74LV365N,112

Overview

The NXP USA Inc. 74LV365N,112 is a hex non-inverting buffer and line driver featuring three-state outputs, housed in a 16-pin plastic dual in-line package (DIL). It operates within a supply voltage range of 1.0V to 3.6V and accepts TTL input levels between VCC = 2.7V and VCC = 3.6V. The device provides bus driver output capability with typical VOLP of 0.8V and VOHV of 2V at VCC = 3.3V. Propagation delay ranges from 9ns to 36ns depending on load and voltage. It functions across an ambient temperature range of -40°C to +125°C.

Feature Summary

• Hex non-inverting buffer/line driver architecture with three-state outputs controlled by active-LOW enable inputs.
• Optimized for low-voltage applications with operation down to 1.0V and compatibility with TTL input levels at higher voltages.
• Bus driver output capability designed to minimize ground bounce and undershoot during switching operations.

Applications

• Memory module address and data bus buffering
• Clock distribution networks requiring high fan-out
• Portable battery-powered systems utilizing low supply voltages

Procurement Notes

Verify the specific ordering suffix '112' corresponds to the tape-and-reel or tube packaging configuration required for your assembly process. Confirm that the 16-pin DIL package dimensions align with your PCB footprint specifications. Ensure the operating environment remains within the specified -40°C to +125°C temperature range to maintain guaranteed DC and AC electrical characteristics.

Selection Notes

Select this component when a hex buffer with three-state control is required for low-voltage digital interfaces. It serves as a pin-compatible alternative to 74HC/HCT365 devices but offers optimized performance for lower supply voltages. Consider the propagation delay limits under your specific load capacitance conditions to ensure signal integrity is maintained within system timing constraints.

Part Context

This device belongs to the 74LV series of low-voltage CMOS logic integrated circuits manufactured by NXP USA Inc. The 74LV family is engineered for applications demanding reduced power consumption and operation below standard 5V logic levels. The 74LV365 specifically addresses the need for buffered signals in systems where voltage translation or bus isolation is necessary without inversion.

Replacement Considerations

Public confirmed substitute part numbers include SN74LVTH652PW and SN74LVTH652PWR from Texas Instruments, which are listed as similar replacements.