74LV367DB,118

Overview

The 74LV367DB,118 is a hex non-inverting buffer and line driver featuring three-state outputs. It operates within a supply voltage range of 1.0 V to 3.6 V and accepts TTL input levels when VCC is between 2.7 V and 3.6 V. The device utilizes a 16-pin SSOP package (SOT338-1) and supports an operating temperature range from -40 °C to +125 °C. Propagation delay typically ranges from 8 ns at 3.3 V with 15 pF load to 23 ns maximum at 3.0–3.6 V with 50 pF load.

Feature Summary

• Low-voltage CMOS technology optimized for applications requiring 1.0 V to 3.6 V operation
• Three-state outputs controlled by active-low enable inputs (nOE)
• Compatible with TTL input logic levels at specific supply voltages
• Bus driver output capability designed for system interconnects

Applications

• Memory module address and data bus drivers
• Clock distribution buffers in low-voltage systems
• Signal buffering between mixed voltage logic domains
• Line driving for high-speed digital communication interfaces

Procurement Notes

Verify the specific ordering code suffix to confirm the SSOP-16 package type and tape-and-reel quantity. Confirm RoHS compliance status and lead times directly with authorized distributors or NXP sales offices prior to order placement. Ensure the procurement channel provides valid traceability documentation for the component batch.

Selection Notes

Select this component for designs requiring hex buffering with tri-state control in low-voltage environments. It serves as a functional replacement for 74HC/HCT367 devices where lower power consumption and wider voltage tolerance are required. Verify that the system's input signal rise and fall times remain within the specified limits to ensure accurate propagation delay performance.

Part Context

This component belongs to the 74LV series of low-voltage CMOS logic devices manufactured by NXP Semiconductors. It is functionally equivalent to the Philips 74LV367 specification. The 'DB' designation indicates the 16-lead plastic shrink small outline package (SSOP), while ',118' denotes the standard reel packaging configuration used for automated surface-mount assembly.

Replacement Considerations

The datasheet explicitly states pin and function compatibility with the 74HC367 and 74HCT367 families. Designers should verify voltage level compatibility, as the LV series operates down to 1.0 V, whereas HC/HCT variants typically require higher minimum supply voltages.