7C-24.576MBA-T

Oscillators Overview

The TXC Corporation 7C-24.576MBA-T is a standard CMOS crystal oscillator operating at 24.576 MHz with ±25 ppm frequency stability. It functions on a 3.3 V supply voltage, drawing a maximum current of 30 mA. The device features an enable/disable control function and utilizes a crystal base resonator. It is housed in a compact 4-SMD, no-lead package measuring 3.20 mm x 2.50 mm x 1.10 mm. The component supports surface-mount installation and operates within a temperature range of -10°C to +70°C.

Oscillators Feature Summary

• Integrated enable and disable functionality for power management
• Compact 4-SMD no-lead surface mount package design
• CMOS output format compatible with digital logic circuits

Oscillators Applications

• Embedded system clock generation
• Microcontroller timing references
• Digital communication interface synchronization

Oscillators Procurement Notes

Verify the specific suffix 'B' indicates the required ±25 ppm stability and 3.3V operation. Confirm the 4-SMD package dimensions match the PCB footprint. Ensure the enable/disable pin configuration aligns with the system control logic. Check RoHS compliance status for regulatory requirements.

Oscillators Selection Notes

Select this component when a small form factor oscillator with power control is needed. The ±25 ppm stability suits general digital applications. Consider the -10°C to +70°C range against environmental conditions. Compare current consumption against other series if power efficiency is critical.

Oscillators Part Context

This part belongs to the TXC 7C series of tight stability oscillators. It differs from the 7X series by offering enable/disable control. The 7C series provides a balance between size and performance for consumer electronics. It replaces older through-hole or larger SMD oscillator solutions.

Oscillators Replacement Considerations

The 7X-24.576MBA-T is listed as a similar alternative. Verify package compatibility and electrical parameter alignment before substitution. Ensure the replacement maintains the required enable/disable functionality.