A14V60A-PQ208C

Field Programmable Gate Array Overview

The A14V60A-PQ208C is a Field Programmable Gate Array (FPGA) from the Microsemi ACT3 family. It features 848 Configurable Logic Blocks (CLBs) and 6,000 equivalent gates. The device operates at a maximum clock frequency of 110 MHz using CMOS technology. It is housed in a 208-pin Plastic Quad Flat Package (PQFP-208), specifically MO-143 format. The component supports an operating temperature range from -40 °C to 85 °C. Key physical parameters include a length of 28 mm, a maximum seating height of 4.1 mm, and a peak reflow temperature of 245 °C. It has a moisture sensitivity level of 3.

Field Programmable Gate Array Feature Summary

• Provides high-density logic integration with 848 CLBs for complex digital designs.
• Supports deterministic timing through 100% automatic place-and-route capabilities.
• Features fast clock-to-output performance suitable for high-speed applications.

Field Programmable Gate Array Applications

• High-speed controllers
• Address decoding systems
• Peripheral bus interfaces

Field Programmable Gate Array Procurement Notes

Verify the specific suffix 'C' against official Microsemi documentation to confirm it denotes the commercial temperature grade (-40°C to +85°C). Ensure the package type matches the PQFP-208 specification. Confirm RoHS compliance status as records vary between Actel and Microsemi eras. Validate that the part number corresponds to the ACT3 Flash FPGA family rather than SRAM-based devices.

Field Programmable Gate Array Selection Notes

Select this model when 6,000 system gates are sufficient for the design requirements. The PQFP-208 package is appropriate for standard surface-mount assembly processes. Consider the 110 MHz speed grade if higher throughput is not required. Verify pin compatibility with existing board layouts designed for the ACT3 family. Check if the plastic package meets environmental constraints compared to ceramic alternatives.

Field Programmable Gate Array Part Context

This component belongs to the Microsemi ACT3 Flash FPGA family, originally developed by Actel before its acquisition. The ACT3 series utilizes non-volatile Flash technology, allowing instant-on functionality without external configuration memory. This distinguishes it from SRAM-based FPGAs that require bootloaders. The A14V60A represents a mid-range density option within this legacy portfolio.

Field Programmable Gate Array Replacement Considerations

Direct pin-compatible replacements within the same package may include other ACT3 devices such as the A14V60A-PQ208I for industrial temperature grades. Cross-family migration to ProASIC3 or SmartFusion requires schematic redesign due to architectural differences. Verify availability of obsolete Actel/Microsemi stock or qualified second-source manufacturers.