A3P060-FGG144T

Field Programmable Gate Array Overview

The A3P060-FGG144T is a Field Programmable Gate Array from the Microchip Technology ProASIC3 Flash family. It features 1536 configurable logic blocks and approximately 60,000 system gates. The device operates with a maximum clock frequency of 350 MHz and supports a core voltage range of 1.425 V to 1.575 V. It utilizes a 144-pin FineLine BGA package with a 13 mm x 13 mm footprint. The component is rated for an industrial operating temperature range of 0°C to +85°C and includes 1 Kbit of non-volatile FlashROM user memory.

Field Programmable Gate Array Feature Summary

• Instant-on capability due to non-volatile flash-based architecture that retains programmed designs when powered off
• Supports single-voltage 1.5 V system operation with low-impedance flash switches for reduced power consumption
• Enables in-system programming via JTAG using on-chip AES decryption for secure configuration

Field Programmable Gate Array Applications

• Industrial control systems requiring instant-on functionality
• Secure communication interfaces utilizing hardware encryption
• General-purpose programmable logic applications

Field Programmable Gate Array Procurement Notes

Verify the specific suffix 'T' against official Microchip documentation to confirm tape-and-reel packaging status, as standard datasheets may not explicitly detail all suffix variations. Ensure the procurement source provides valid RoHS compliance certificates and confirms the component originates from authorized Microchip distribution channels to avoid counterfeit risks.

Field Programmable Gate Array Selection Notes

Select this model for applications necessitating non-vatile FPGA logic without external boot memory. Compare gate density against the AGL series if ultra-low power freeze modes are required instead of instant-on. Confirm pin compatibility with existing PCB layouts, as the FGG144 package dimensions must align with the target board design constraints.

Field Programmable Gate Array Part Context

This component belongs to the ProASIC3 Flash family, which bridges the gap between ASICs and SRAM-based FPGAs by offering reprogrammability with non-volatile storage. The A3P060 variant represents the entry-level capacity within this high-performance 130nm process technology, designed for cost-sensitive embedded logic solutions.

Field Programmable Gate Array Replacement Considerations

Direct pin-compatible replacements within the same package include other members of the A3P060 series such as the A3P060-VQG100 or A3P060-2TQG144, provided the I/O count and package type match the application requirements.