A3PE1500-1FGG484I

Field Programmable Gate Array Overview

The A3PE1500-1FGG484I is a ProASIC3 FPGA manufactured by Microchip Technology, featuring 1.5 million system gates and 16,000 logic elements. It operates within a voltage range of 1.425 V to 1.575 V, with a typical operating voltage of 1.5 V. The device supports up to 280 I/Os and achieves a maximum operating frequency of 272 MHz. Packaged in an FBGA-484 format for surface mount installation, it functions reliably between -40°C and +85°C. This component includes humidity sensitivity classification and weighs approximately 400 mg.

Field Programmable Gate Array Feature Summary

• Integrates 1.5 million system gates with 16K LEs for high-density programmable logic applications
• Supports mixed-voltage I/O standards including LVDS, LVTTL, and LVCMOS across multiple banks
• Features hot-swappable and cold sparing I/O capabilities with programmable slew rates

Field Programmable Gate Array Applications

• High-speed digital signal processing requiring low-latency parallel data paths
• Industrial control systems operating in extended temperature environments
• Communication interface bridging between different voltage domains

Field Programmable Gate Array Procurement Notes

Verify the specific suffix '1' indicates the speed grade and 'I' denotes the industrial temperature range upon ordering. Confirm package type FBGA-484 matches the target footprint. Check RoHS compliance status as indicated in official documentation. Ensure ESD handling protocols are followed due to humidity sensitivity classification during storage and assembly processes.

Field Programmable Gate Array Selection Notes

Select this model when 1.5M gate capacity and 272 MHz performance are required in a 484-pin BGA package. Compare against M1A3PE1500 variants if embedded ARM Cortex-M1 processing is needed instead of pure logic resources. Verify I/O count requirements against the 280 available pins. Consider thermal management solutions suitable for the FBGA-484 form factor under continuous operation at maximum frequencies.

Field Programmable Gate Array Part Context

This part belongs to the Microchip ProASIC3 family, which bridges the gap between ASICs and standard FPGAs. It utilizes flash-based non-volatile technology, eliminating the need for external configuration memory. The A3PE series specifically targets cost-sensitive applications requiring moderate logic density and robust I/O flexibility compared to higher-end Fusion or RTG4 devices.

Field Programmable Gate Array Replacement Considerations

Direct pin-compatible replacements within the same family include A3PE1500-2FGG484I for higher speed grades. For functional equivalents with similar gate counts but different architectures, consider A3P1000 series devices if lower I/O counts are acceptable. Verify that any substitute maintains the FBGA-484 package dimensions and electrical characteristics.