ABS2MS_R2_00101

Bridge Rectifier Overview

The ABS2MS_R2_00101 is a surface mount glass passivated single-phase bridge rectifier manufactured by Panjit International Inc. It features an ABS-4 package with dimensions of 5.2 mm length, 4.5 mm width, and 1.5 mm height. The device supports a maximum average forward current of 2 A and a peak repetitive reverse voltage of 1000 V. Electrical characteristics include a maximum forward voltage of 1.1 V at 2 A and a reverse current of 5 uA at 1000 V and 25°C. It withstands a peak forward surge current of 140 A for 1.0 ms pulses. Operating junction temperature ranges from -55°C to +150°C.

Bridge Rectifier Feature Summary

• Glass passivated chip junction construction
• Designed for automatic assembly processes
• High surge current capability
• Lead-free composition compliant with EU RoHS 2.0

Bridge Rectifier Applications

• Quick chargers under 20W
• General power adapters under 30W
• Indoor LED lighting including bulbs and PAR lighting
• Network communication power supplies under 35W
• Smart speaker adapters under 20W

Bridge Rectifier Procurement Notes

Verify the specific ordering suffix _R2_00101 against official documentation to confirm packaging details. The datasheet indicates this part number corresponds to the ABS package type supplied in reels containing 4000 pieces on 13-inch reels. Confirm compliance requirements such as IEC 61249 green molding standards during procurement validation.

Bridge Rectifier Selection Notes

Select this component for surface mount applications requiring 2 A continuous current and 1000 V blocking voltage. Ensure thermal management accounts for a typical thermal resistance of 60°C/W when mounted on FR4 PCB standard pads. Verify that the operating environment stays within the specified -55°C to +150°C junction temperature range for reliable performance.

Bridge Rectifier Part Context

This component belongs to the ABS series of surface mount bridge rectifiers produced by Panjit International Inc. It utilizes the ABS-4 package configuration designed for compact printed circuit board layouts. The product line emphasizes low profile construction suitable for automated pick-and-place manufacturing processes in consumer electronics assembly.

Bridge Rectifier Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Engineers must verify pin compatibility, electrical ratings, and package dimensions before substituting with other manufacturers' bridge rectifiers.