ACB1608L-015-T

Overview

The ACB1608L-015-T is a single-line ferrite bead from the TDK ACB series, designed for surface-mount applications in the 0603 (1608 metric) package. It features an impedance of 15 Ohms at 100 MHz and a maximum DC resistance of 100 mOhm. The component supports a maximum current rating of 500 mA and operates within a temperature range of -40°C to +85°C. Dimensions are 1.60 mm in length, 0.80 mm in width, with a maximum height of 1.10 mm.

Feature Summary

• Provides signal line filtering through high impedance characteristics at specific frequencies
• Compact surface-mount design suitable for space-constrained PCB layouts
• Capable of handling continuous currents up to 500 mA without saturation

Applications

• Signal line noise suppression in electronic circuits
• EMI filtering for data lines
• Power supply input filtering for low-current applications

Procurement Notes

Verify the exact part number ACB1608L-015-T against official TDK documentation to ensure compatibility with your circuit requirements. Confirm that the 500 mA current rating and 15 Ohm impedance at 100 MHz meet your design specifications. Check for RoHS compliance status as indicated in the latest datasheet. Ensure the 0603 package dimensions fit your board layout constraints before ordering.

Selection Notes

Select this component when signal integrity requires attenuation of high-frequency noise around 100 MHz. The low DC resistance minimizes voltage drop in power paths. Consider the 500 mA current limit for load conditions. The 0603 footprint offers a balance between performance and board space. Evaluate thermal dissipation capabilities if operating near maximum current ratings.

Part Context

This ferrite bead belongs to TDK's ACB series, which focuses on compact signal line filters. The ACB series utilizes specialized ferrite materials to provide effective EMI suppression in small form factors. These components are commonly used in consumer electronics and industrial equipment where space is limited but noise control is critical.

Replacement Considerations

Consult TDK's official cross-reference guides for verified substitutes. Equivalent parts must match the 15 Ohm impedance at 100 MHz, 500 mA current rating, and 0603 package dimensions. Verify material composition and frequency response curves to ensure identical filtering performance.