ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：CMC 3LN 600 OHM SMD
- Series：ACM
- Mfr：TDK Corporation
- Package：Tape & Reel (TR)
- Filter Type：Signal Line
- Number of Lines：3
- Current Rating (Max)：-
- DC Resistance (DCR) (Max)：-
- Voltage Rating - DC：20V
- Voltage Rating - AC：-
- Operating Temperature：-40°C ~ 85°C
- Ratings：-
- Approval Agency：-
- Features：-
- Mounting Type：Surface Mount
- Size / Dimension：0.098" L x 0.079" W (2.50mm x 2.00mm)
- Height (Max)：0.051" (1.30mm)
- Package / Case：1008 (2520 Metric), 6 PC Pad
- Inductance @ Frequency：-
- Impedance @ Frequency：600 Ohms @ 100 MHz
- Qualification：-
- Grade：-
Download product information
Overview
The ACM2520-601-3P-T002 is a three-channel surface-mount common mode choke manufactured by TDK Corporation. It belongs to the ACM series and is designed for high-speed differential signal lines and general signal lines. The component features a 600 Ohm impedance at 100 MHz and supports a maximum DC current of 300 mA. It has a maximum DC resistance of 450 mOhms and operates within a temperature range of -40°C to +85°C. The physical dimensions are 2.5 mm in length, 2.0 mm in width, and 1.2 mm in height, housed in an 0805 (2012 metric) package.
Feature Summary
- Provides effective noise suppression for high-speed differential signal lines through common mode filtering capabilities.
- Features a compact surface-mount design suitable for space-constrained printed circuit board layouts.
- Supports multiple signal channels within a single small footprint to simplify circuit design.
Applications
- High-speed data interface protection
- General signal line filtering
- Differential signal line noise reduction
Procurement Notes
Verify the specific pin configuration and channel count required for your application, as this model is a three-channel device. Confirm that the 300 mA current rating meets your system's operational requirements. Ensure compatibility with standard SMD reflow soldering processes. Check for any specific handling instructions regarding moisture sensitivity levels before assembly.
Selection Notes
Select this component when multi-line signal integrity is critical in a compact form factor. Compare the 600 Ohm impedance against target noise frequencies to ensure adequate attenuation. Consider the 450 mOhms DCR impact on signal loss. Evaluate the 300 mA saturation current against peak load conditions to prevent performance degradation during operation.
Part Context
This part is part of TDK's ACM series of common mode chokes, which are widely used in electronic devices for electromagnetic interference suppression. The series offers various channel counts and impedance values to suit different signal processing needs. The ACM2520-601-3P-T002 specifically addresses applications requiring three-line filtering in a standard 0805 package size.
Replacement Considerations
Publicly confirmed substitute part numbers for ACM2520-601-3P-T002 were not found in the provided source material. Verify compatibility with alternative three-channel chokes from other manufacturers based on impedance, current rating, and package dimensions.
