ACML-0603H-110-T

Overview

The ACML-0603H-110-T is a single-line ferrite chip bead from the Abracon ACML-H series, designed for surface mount applications. It features a 0603 (1608 metric) package with dimensions of 1.6 mm length and 0.8 mm width. The component provides an impedance of 110 ohms at a test frequency of 100 MHz. It supports a maximum DC current of 500 mA and has a maximum DC resistance of 350 milliohms. The impedance tolerance is specified at ±25%. The device operates within a temperature range of -55°C to +125°C.

Feature Summary

• Provides high-frequency noise suppression through ferrite material properties
• Designed for compact surface mount integration in space-constrained layouts
• Capable of handling rated DC currents without saturation

Applications

• High-speed digital signal line filtering
• Power supply output noise attenuation
• EMI suppression in portable electronic devices

Procurement Notes

Verify the specific suffix 'T' corresponds to the required tape and reel packaging configuration. Confirm that the 0603 footprint matches the target PCB land pattern. Ensure the 500 mA current rating meets the circuit's peak load requirements. Check RoHS compliance status against project specifications. Validate the 110 Ohm impedance value at 100 MHz against the design filter criteria.

Selection Notes

Select this component when a low-profile 0603 ferrite bead is required for moderate current applications up to 500 mA. The 110 Ohm impedance at 100 MHz targets common EMI frequencies in digital circuits. Compare the 350 mOhm DCR against voltage drop constraints in the power path. Consider the ACML-H series thermal stability if operating near the upper temperature limit.

Part Context

This part belongs to the Abracon ACML-H series of multilayer ferrite chip beads. The series offers various impedance values and current ratings within standard SMD packages. The ACML-0603H-110-T specifically addresses the need for noise filtering in 0603 form factors where higher current capacity than smaller packages allows.

Replacement Considerations

Cross-reference other 0603 ferrite beads with 110 Ohm impedance at 100 MHz and ≥500 mA current rating. Verify physical footprint compatibility and terminal plating specifications before substitution.