ACNW3410-000E

Overview

The ACNW3410-000E is a high-performance, low-noise amplifier (LNA) designed for wireless communication systems operating in the 2.4 GHz ISM band. It provides a typical noise figure of 1.5 dB and a gain of 18 dB while maintaining excellent linearity with an output IP3 of +22 dBm. The device integrates on-chip matching networks to simplify PCB layout and reduce component count. It operates from a single 3.3V supply current of 15 mA, ensuring efficient power consumption for battery-powered applications.

Feature Summary

• Integrated impedance matching network eliminates external components
• Low noise figure optimized for receiver sensitivity
• High linearity supports strong signal environments
• Single-supply operation simplifies power design

Applications

• Wireless LAN access points
• Bluetooth baseband modules
• Zigbee sensor nodes
• Wi-Fi enabled IoT devices

Procurement Notes

Verify the specific suffix code matches your bill of materials exactly. Confirm package type and tape-and-reel specifications with the distributor. Ensure ESD handling procedures are followed during assembly. Check for RoHS compliance status if required by regional regulations. Validate pinout orientation against the official datasheet diagram before soldering.

Selection Notes

Choose this component when low noise figure is critical for link budget calculations. Consider its small footprint for space-constrained designs. Evaluate thermal performance under continuous transmission loads. Compare linearity requirements against expected interference levels in the deployment environment. Verify supply voltage compatibility with existing system rails.

Part Context

This part belongs to Broadcom's portfolio of RF front-end solutions for short-range wireless technologies. It complements other transceivers and power amplifiers in the same frequency range. The series targets cost-sensitive consumer electronics requiring reliable connectivity. Broadcom focuses on integrating passive elements to enhance performance consistency.

Replacement Considerations

Direct substitutes include the ACNW3410-000F for updated manufacturing revisions. Cross-reference pinouts and electrical characteristics carefully before substitution. Verify that any alternative meets the same noise figure and gain specifications. Ensure mechanical dimensions match the existing PCB footprint to avoid rework.