AD5292BRUZ-20-RL7

$8.32

Description：IC DGT POT 20KOHM 1024TP 14TSSOP
Series：-

SKU:ae44d560701b Category: Digital Potentiometers Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

AD5292BRUZ-20-RL7 is listed in the Digital Potentiometers range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC DGT POT 20KOHM 1024TP 14TSSOP. Review the specifications below when checking this part for your BOM.

Digital Potentiometers specifications for AD5292BRUZ-20-RL7

Description：IC DGT POT 20KOHM 1024TP 14TSSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Taper：Linear
Configuration：Potentiometer
Number of Circuits：1
Number of Taps：1024
Resistance (Ohms)：20k
Interface：SPI
Memory Type：Non-Volatile
Voltage - Supply：9V ~ 33V, ±9V ~ 16.5V
Features：Cascade Pin
Tolerance：±1%
Temperature Coefficient (Typ)：35ppm/°C
Mounting Type：Surface Mount
Supplier Device Package：14-TSSOP
Package / Case：14-TSSOP (0.173", 4.40mm Width)
Operating Temperature：-40°C ~ 105°C
Resistance - Wiper (Ohms) (Typ)：60
Grade：-
Qualification：-

Digital Potentiometers datasheet and documents for AD5292BRUZ-20-RL7

AD5292BRUZ-20-RL7

Digital Potentiometers Overview

The AD5292BRUZ-20-RL7 is a single-channel, 10-bit (1024-position) digital potentiometer manufactured by Analog Devices Inc. It features a nominal resistance of 20 kΩ and operates within a supply voltage range of +9 V to +33 V (single-supply) or ±9 V to ±16.5 V (dual-supply). The device incorporates nonvolatile memory allowing for 20-times programmable wiper settings that persist after power loss. It utilizes an SPI-compatible serial interface for control and readback, ensuring industry-leading resistor tolerance errors of maximum ±1% in performance mode.

Digital Potentiometers Feature Summary

10-bit resolution with 1024 tap positions
20-times programmable nonvolatile wiper memory
Maximum ±1% nominal resistor tolerance error in R-Perf mode
SPI-compatible serial interface with wiper setting readback

Digital Potentiometers Applications

Mechanical potentiometer replacement
Instrumentation gain and offset adjustment
Programmable voltage-to-current conversion
Sensor calibration

Digital Potentiometers Procurement Notes

Verify the specific suffix 'RL7' against official documentation to confirm reel packaging specifications. Ensure the logic supply voltage (VLOGIC) matches the system's digital interface levels between 2.7 V and 5.5 V. Confirm thermal management requirements for the TSSOP-14 package under maximum operating conditions.

Digital Potentiometers Selection Notes

Select this component when high-resolution analog control is required without mechanical wear. The 20 kΩ value suits applications needing moderate current handling. Verify terminal voltage ranges align with signal levels, as the wiper voltage must remain between VSS and VDD. Consider the R-Perf mode if strict resistor tolerance matching across temperature is critical.

Digital Potentiometers Part Context

This part belongs to the AD5291/AD5292 family of digital potentiometers. The AD5292 variant specifically offers 10-bit (1024-position) resolution compared to the 8-bit (256-position) AD5291. Both share identical pinouts, interfaces, and nonvolatile memory capabilities, differing primarily in resolution and associated linearity specifications.