AD8054ARU

Instrumentation, Op Amps, Buffer Amps Overview

The AD8054ARU is a quad, low-cost, high-speed voltage feedback amplifier from Analog Devices Inc., housed in a 14-lead TSSOP package. It operates on single or dual supplies ranging from 3 V to 12 V with quiescent current of approximately 2.75 mA per amplifier at 5 V. The device features a typical −3 dB bandwidth of 150 MHz at unity gain and a slew rate of 170 V/μs under ±5 V supply conditions. It offers rail-to-rail output swing, settling to 0.1% within 40 ns, and supports capacitive loads up to 40 pF at a gain of +2.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Quad configuration providing four independent high-speed voltage feedback amplifiers in a single package.
• Rail-to-rail output capability allowing maximum dynamic range by swinging close to both supply rails.
• High slew rate and wide bandwidth suitable for demanding video and signal processing applications.
• Low power consumption design optimized for portable and battery-operated equipment.

Instrumentation, Op Amps, Buffer Amps Applications

• Active filters
• Analog-to-digital drivers
• Consumer video systems
• Professional cameras
• CCD imaging systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific grade suffix (e.g., ARU) against the manufacturer's ordering guide to confirm temperature range and package type. Ensure the source document explicitly lists the AD8054ARU variant to avoid confusion with other pin-compatible or functionally similar parts in the AD8051/AD8052 family. Cross-reference thermal resistance values for the TSSOP-14 package if power dissipation calculations are required for your specific application environment.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select the AD8054ARU when a quad amplifier topology is required to save board space compared to using multiple single or dual units. Consider this part for applications needing high speed with lower power consumption than the dual AD8051/AD8052 counterparts. Verify that the 14-lead TSSOP package fits your PCB footprint constraints and that the operating temperature range meets your environmental specifications.

Instrumentation, Op Amps, Buffer Amps Part Context

The AD8054 is part of the AD8051/AD8052/AD8054 family of low-cost, high-speed rail-to-rail amplifiers. While the AD8051 is a single amplifier and the AD8052 is a dual, the AD8054 integrates four amplifiers into one package. All variants share similar electrical characteristics, including high slew rates and wide bandwidths, but differ in channel count and total power consumption. The family utilizes Analog Devices' XFCB process for high-frequency performance.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Publicly confirmed substitute part numbers are not provided in the source material. Users should consult the manufacturer's official documentation for any recommended replacements or updated versions of the AD8054 series.

Instrumentation, Op Amps, Buffer Amps FAQ

What is the maximum capacitive load the AD8054 can drive?

The AD8054 can drive a capacitive load of up to 40 pF when configured with a closed-loop gain of +2.

Does the AD8054 support single-supply operation?

Yes, the AD8054 supports single-supply operation with an operating voltage range from 3 V to 12 V.

What is the input common-mode voltage range for the AD8054?

The input common-mode voltage range extends from −0.2 V to +4 V when powered by a 5 V supply.