AD9213BBPZ-6G

Overview

The AD9213BBPZ-6G is a single-channel, 12-bit RF analog-to-digital converter with a maximum sampling rate of 6 GSPS and a 6.5 GHz input bandwidth. It features a 16-lane JESD204B interface supporting up to 16 Gbps line rates. The device utilizes an interleaved pipeline architecture with proprietary calibration to suppress spurious artifacts. Key specifications include a typical noise spectral density of -153 dBFS/Hz at 170 MHz, a signal-to-noise ratio of 58.2 dBFS at 170 MHz, and an effective number of bits of 9.4 bits. Total power dissipation is typically 4.83 W. It operates over a junction temperature range of -20°C to +115°C and is housed in a 192-ball BGA package.

Feature Summary

• Integrated digital downconverter with numerically controlled oscillator for frequency translation and decimation
• Supports sample-accurate multichip synchronization with one-sample accuracy
• Includes on-chip negative voltage generators and fast overrange detection for efficient AGC
• Features integrated input buffer with 50 Ω differential input impedance

Applications

• High dynamic range frequency domain applications requiring wide instantaneous bandwidth
• Time domain applications demanding low conversion error rates
• Fast frequency hopping surveillance systems utilizing NCO profile settings
• RF signal processing systems requiring high linearity and low code error rates

Procurement Notes

Verify the specific suffix '6G' confirms the 6 GSPS sampling rate variant against the official Analog Devices ordering guide. Ensure compatibility with the EVAL-AD9213 evaluation board if development support is required. Confirm that the 192-ball BGA package requires appropriate thermal management solutions due to the power dissipation levels specified in the datasheet.

Selection Notes

Select this component when a single-channel 12-bit resolution is required with a maximum throughput of 6 GSPS. The AD9213-6G is suitable for applications where the full 10.25 GSPS capability of the AD9213-10G is unnecessary but high dynamic range and low jitter are critical. Consider the integrated DDC if output data rate reduction via decimation is needed to simplify downstream FPGA interfaces.

Part Context

The AD9213BBPZ-6G belongs to the AD9213 family of RF ADCs from Analog Devices. This family includes variants such as the AD9213BBPZ-10G, which supports higher sampling rates up to 10.25 GSPS. All variants share the same 12 mm × 12 mm 192-ball BGA package and core architecture, differing primarily in their maximum supported clock frequencies and associated performance metrics like power consumption and SFDR at high frequencies.

Replacement Considerations

The AD9213BBPZ-10G is a pin-compatible alternative offering higher sampling rates up to 10.25 GSPS. Verify if the increased bandwidth and power consumption of the 10G variant align with system requirements. No other direct pin-for-pin replacements are documented in the provided source material.