ADF4360-0BCPZ

Overview

The ADF4360-0 is a fully integrated integer-N synthesizer and voltage-controlled oscillator (VCO) designed for a center frequency of 2600 MHz. It operates within an output frequency range of 2400 MHz to 2725 MHz, with a divide-by-2 option providing 1200 MHz to 1360 MHz. The device supports a 3-wire serial interface and functions on a 3.0 V to 3.6 V power supply. Key electrical specifications include a typical phase noise of −111 dBc/Hz at a 100 kHz offset and a programmable output power ranging from −13 dBm to −6.5 dBm.

Feature Summary

• Integrated integer-N synthesizer and VCO covering 2400 MHz to 2725 MHz
• Programmable dual-modulus prescaler options: 8/9, 16/17, or 32/33
• Adjustable output power levels from −13 dBm to −6.5 dBm in 3 dB steps
• Hardware and software power-down modes with low current consumption

Applications

• Wireless handsets (DECT, GSM, PCS, DCS, WCDMA)
• Test equipment
• Wireless LANs
• CATV equipment

Procurement Notes

Verify the specific suffix against the manufacturer's ordering guide to confirm package type and tape/reel configuration. Ensure compatibility with the required operating temperature range of –40°C to +85°C. Confirm that the design accommodates the exposed pad connection to AGND for proper thermal management and grounding.

Selection Notes

Select the appropriate prescaler value (8/9, 16/17, or 32/33) based on the desired frequency resolution and VCO operating range. Configure the charge pump current via the RSET resistor to match loop filter requirements. Ensure the reference input sensitivity matches the source signal amplitude, as it accepts CMOS or AC-coupled signals.

Part Context

This component belongs to the ADF4360 family of frequency synthesizers. The -0 suffix specifically denotes the version optimized for the 2400 MHz to 2725 MHz band. Other variants in the family cover different frequency ranges, such as 2000 MHz to 2550 MHz or 2500 MHz to 3000 MHz, sharing similar architectural features but differing in VCO tuning characteristics.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.