ADG1207LYCPZ-REEL7

Analog Switches, Multiplexers, Demultiplexers Overview

The ADG1207LYCPZ-REEL7 is an 8-channel differential analog multiplexer from Analog Devices, utilizing iCMOS technology in a 32-lead, 5 mm × 5 mm LFCSP package. It switches one of eight differential inputs to a common differential output based on 3-bit binary address lines (A0, A1, A2). The device supports dual supplies ranging from ±5 V to ±16.5 V and single supplies from 5 V to 16.5 V. Key electrical parameters include a maximum on-resistance of 200 Ω at ±15 V, off capacitance of 1.5 pF, and charge injection under 1 pC. It features 1.2 V and 1.8 V JEDEC logic compliance via the VL supply pin.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Supports 1.2 V and 1.8 V JEDEC standard compliant logic levels through flexible VL supply
• Features ultralow capacitance and charge injection for high-fidelity signal switching
• Guaranteed switch-off state when digital inputs are floating without external pull-down resistors
• Provides break-before-make switching action to prevent signal shorting during transitions

Analog Switches, Multiplexers, Demultiplexers Applications

• Audio and video routing systems
• Automatic test equipment
• Data acquisition systems
• Battery-powered instrumentation
• Sample-and-hold circuits
• Communication systems
• FPGA and microcontroller interfacing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix REEL7 confirms tape-and-reel packaging configuration. Confirm the Y sub-series designation aligns with the required extended temperature range specifications. Ensure the LFCSP-32 package dimensions match the target PCB footprint constraints. Validate that the VL pin voltage requirements correspond with the host controller's logic supply rails.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component for applications requiring differential signal routing with minimal signal distortion. The low off-capacitance makes it suitable for high-frequency bandwidth requirements. Ensure the system power supply allows for the specified ±15 V or 12 V single-supply operation. Verify that the host logic interface can drive the VL pin within the 1.1 V to 1.95 V range for proper JEDEC compliance.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the ADG1206L/ADG1207L family of low capacitance iCMOS multiplexers. While the ADG1206L provides 16 single-ended channels, the ADG1207L is optimized for 8 differential channels. Both share identical packaging, logic control interfaces, and core iCMOS performance characteristics, differing primarily in channel count and signal type.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.