ADG1413YCPZ-REEL

Analog Switches, Multiplexers, Demultiplexers Overview

The ADG1413YCPZ-REEL is a monolithic iCMOS quad SPST analog switch in a 16-lead LFCSP package. It features a typical on-resistance of 1.5 Ω with a maximum of 2.6 Ω over temperature. The device supports dual supplies from ±4.5 V to ±16.5 V or a single supply from 5 V to 16.5 V. Key electrical parameters include a maximum on-resistance flatness of 0.45 Ω, off-isolation of -80 dB, and crosstalk of -100 dB. Switching times are typically 100 ns for turn-on and 90 ns for turn-off at ±15 V. Power consumption is ultralow, with supply current typically 220 µA at 5 V logic inputs.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• iCMOS construction enables high voltage operation with low power dissipation
• Flat on-resistance profile ensures excellent linearity and low distortion
• Break-before-make switching action prevents signal shorting in multiplexer applications
• 3 V logic-compatible inputs simplify interface with digital control systems

Analog Switches, Multiplexers, Demultiplexers Applications

• Automated test equipment
• Data acquisition systems
• Audio and video signal routing
• Relay replacement circuits

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix REEL against the manufacturer's official documentation to confirm packaging format and quantity. Ensure the Y suffix indicates the extended temperature range required for the application. Cross-reference the LFCSP-16 pinout with the target PCB footprint to guarantee mechanical compatibility before finalizing procurement orders.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when break-before-make timing is critical for multiplexing tasks. Compare the 1.5 Ω on-resistance against system requirements to ensure acceptable signal loss. Verify that the 3 V logic compatibility matches the available control voltage levels. Consider the LFCSP thermal performance if multiple switches operate simultaneously under high load conditions.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the ADG141x family of industrial CMOS analog switches. It differs from the ADG1411 by having mixed logic polarity: two switches respond to Logic 0 while the other two respond to Logic 1. This configuration facilitates direct connection to multiplexer address lines without external inversion logic. The Y variant denotes qualification for the full automotive temperature range.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

The ADG1413YRUZ offers identical electrical specifications but utilizes a TSSOP-16 package instead of LFCSP. Designers must verify pin-to-pin compatibility and thermal pad connections when substituting between package types. Other family members like the ADG1411 or ADG1412 require logic inversion adjustments due to different truth tables.

Analog Switches, Multiplexers, Demultiplexers FAQ

How does the ADG1413 logic configuration differ from standard quad switches?

The ADG1413 has mixed logic polarity where switches S1 and S4 activate with Logic 0, while S2 and S3 activate with Logic 1. This allows direct interfacing with binary address lines for multiplexer applications.

What is the significance of the break-before-make time delay?

The break-before-make delay ensures that one channel fully disconnects before another connects. This prevents momentary short circuits between signals during switching transitions, which is essential for multiplexer designs.

Can this device operate with a single 5 V supply?

Yes, the ADG1413 supports single-supply operation from 5 V to 16.5 V. However, the on-resistance increases to approximately 3.3 Ω typical at 5 V compared to 1.5 Ω at ±15 V.