ADG613YRUZ-REEL7

Analog Switches, Multiplexers, Demultiplexers Overview

The ADG613YRUZ-REEL7 is a monolithic CMOS analog switch IC containing four independently selectable single-pole, single-throw (SPST) switches. It operates on dual supplies from ±2.7 V to ±5.5 V or single supplies from +2.7 V to +5.5 V. The device features ultralow charge injection of 1 pC typical and maximum leakage currents of 100 pA at 25°C. On-resistance is specified at 85 Ω typical for dual-supply operation and 210 Ω typical for single-supply operation. Switching times are 65 ns maximum for turn-on and 40 ns maximum for turn-off. It supports an automotive temperature range of −40°C to +125°C and is housed in a 16-lead TSSOP package.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Ultralow charge injection of 1 pC typical ensures minimal signal distortion during switching events.
• Extremely low leakage current of 100 pA maximum maintains signal integrity in high-impedance circuits.
• Rail-to-rail switching capability allows analog signals to extend fully to the supply rails.
• Break-before-make switching action prevents momentary short circuits between channels.

Analog Switches, Multiplexers, Demultiplexers Applications

• Automatic test equipment
• Data acquisition systems
• Battery-powered systems
• Communications systems
• Sample-and-hold systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify that the REEL7 suffix corresponds to the tape-and-reel packaging format required for automated assembly processes. Confirm the Y suffix indicates compliance with the extended automotive temperature range specifications. Ensure the ordering part number matches the specific logic configuration defined for the ADG613 variant within the official Analog Devices documentation.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when low charge injection and minimal leakage are critical for signal fidelity. The ADG613 offers mixed digital control logic, requiring attention to truth table differences compared to the ADG611 and ADG612 variants. Verify that the operating voltage range aligns with the system's single or dual supply requirements before integration.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the ADG611/ADG612/ADG613 family of quad SPST analog switches. The ADG613 is distinct from its siblings due to its specific combination of non-inverted and inverted digital control inputs. All variants share identical electrical characteristics and package options, differing only in the logic polarity applied to their respective control pins.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

The ADG611YRUZ-REEL7 and ADG612YRUZ-REEL7 are direct functional substitutes within the same package and specification profile. Substitution requires verifying that the control logic inversion differences between the ADG613 and these alternatives do not conflict with the existing board design.

Analog Switches, Multiplexers, Demultiplexers FAQ

What is the difference in digital control logic between the ADG613 and the ADG612?

The ADG612 has all four switches with inverted logic, where a logic high turns the switch on. The ADG613 contains two switches with non-inverted logic (similar to ADG611) and two switches with inverted logic (similar to ADG612).

Does the ADG613 exhibit break-before-make switching behavior?

Yes, the ADG613 exhibits break-before-make switching action, which prevents momentary shorts between channels during state transitions.

What is the maximum leakage current specification for this device?

The maximum leakage current is specified as 100 pA at 25°C, increasing to a maximum of 2 nA across the full automotive temperature range.