ADG713BRZ-REEL

Analog Switches, Multiplexers, Demultiplexers Overview

The ADG713BRZ-REEL is a monolithic CMOS device containing four independently selectable single-pole single-throw (SPST) switches. Designed for operation from a single 1.8 V to 5.5 V supply, it features low on resistance of 4 Ω maximum and a −3 dB bandwidth exceeding 200 MHz. The component supports rail-to-rail analog signal ranges and offers fast switching times with tON of 16 ns maximum and tOFF of 10 ns maximum. It operates within a temperature range of −40°C to +85°C and utilizes a 16-lead Standard Small Outline (SOIC) package.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Break-before-make switching prevents channel shorting when configured as a multiplexer.
• Rail-to-rail operation allows the analog signal range to extend from ground to the positive supply voltage.
• Low power dissipation is achieved through advanced submicron CMOS construction.

Analog Switches, Multiplexers, Demultiplexers Applications

• USB 1.1 data signal switching circuits
• Video signal routing and switching
• Sample-and-hold systems
• Mechanical reed relay replacement

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify that the ordering suffix REEL indicates tape and reel packaging rather than tube packaging. Confirm RoHS compliance status by checking the Z suffix designation in the official Analog Devices Ordering Guide. Ensure the specific manufacturing lot meets automotive quality requirements if applicable, noting that W suffix models are designated for such applications.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this model over ADG711 or ADG712 variants specifically when break-before-make timing is required to prevent source-drain shorting during multiplexing operations. Verify that the 16-lead SOIC package dimensions align with the target PCB footprint constraints. Ensure the digital control logic levels are compatible with the specified input voltage thresholds for the intended supply voltage.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the ADG71x family of low-voltage quad SPST switches manufactured by Analog Devices. The series includes ADG711 and ADG712 variants which lack the break-before-make feature found in the ADG713. All members share similar electrical characteristics regarding on-resistance and bandwidth but differ in internal logic sequencing for switch activation.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

ADG713BRU serves as a pin-compatible alternative utilizing the TSSOP package instead of SOIC. ADG713BRZ provides the same functional specifications in tube packaging compared to the reel format of the BRZ-REEL variant.

Analog Switches, Multiplexers, Demultiplexers FAQ

What is the function of the NC pins on the ADG713?

Pins 4 and 12 are marked as No Connect (NC). They are not internally connected to any circuitry and should not be connected to any potential in the design.

How does the ADG713 handle switching between channels?

The ADG713 employs a break-before-make switching sequence. This ensures that one channel turns off before another turns on, preventing simultaneous conduction and potential shorting between sources.

What is the typical charge injection value for this device?

The typical charge injection is 3 pC, measured under conditions where the supply voltage is 2 V, source resistance is 0 Ω, and load capacitance is 1 nF.