ADM5170AP-REEL

Drivers, Receivers, Transceivers Overview

The ADM5170AP-REEL is an octal line driver designed for digital communication systems supporting data rates up to 116 kB/s. It translates TTL or CMOS inputs into EIA RS-232E or RS-423A signal levels via Mode Select pins MS+ and MS–. The device operates on a wide supply voltage range of 9 V to 15 V, with typical enabled power consumption of 36 mA. Slew rate is externally programmable between 2.2 V/μs and 10 V/μs using a resistor connected to the SRA pin. It features 3-state outputs, output short circuit protection, and is housed in a 28-lead PLCC package.

Drivers, Receivers, Transceivers Feature Summary

• Configurable output modes for RS-232E and RS-423A standards
• Resistor-programmable slew rate control for interference management
• Low power CMOS fabrication with shutdown capability
• Integrated output short circuit protection

Drivers, Receivers, Transceivers Applications

• High speed communication interfaces
• Computer I/O ports and peripherals
• High speed modems
• Printers
• Logic level translation

Drivers, Receivers, Transceivers Procurement Notes

Verify component authenticity through authorized Analog Devices distributors or certified partners. Confirm RoHS compliance status as indicated by the 'Z' suffix in ordering guides. Ensure proper electrostatic discharge handling procedures are followed during storage and installation due to device sensitivity.

Drivers, Receivers, Transceivers Selection Notes

Select this component when designing systems requiring multiple single-ended line drivers within a single package. Verify that the application supports the required 9 V to 15 V dual supply configuration. Ensure external components for slew rate adjustment fall within the specified 2 kΩ to 10 kΩ range to meet interface cable requirements.

Drivers, Receivers, Transceivers Part Context

This part belongs to the ADM5170 series of octal line drivers manufactured by Analog Devices. It serves as a low-power replacement for legacy devices like the UC5170C. The family includes variants such as the ADM5170JP and ADM5170APZ, differing primarily in packaging options and temperature ranges while maintaining identical electrical functionality.

Drivers, Receivers, Transceivers Replacement Considerations

The ADM5170AP-REEL is functionally equivalent to the ADM5170APZ variant. Both share the same octal driver architecture and specifications. The primary distinction lies in the shipping format, with the REEL suffix indicating tape-and-reel packaging suitable for automated assembly processes.