ADN4696EBRZ-RL7

Drivers, Receivers, Transceivers Overview

The ADN4696EBRZ-RL7 is a half-duplex, multipoint low voltage differential signaling (M-LVDS) transceiver manufactured by Analog Devices Inc. It operates at data rates up to 200 Mbps and complies with the TIA/EIA-899 standard. The device features a Type 2 receiver with a 100 mV threshold offset for open-circuit and bus-idle fail-safe operation. It supports a common-mode range of −1 V to +3.4 V and includes enhanced ESD protection on bus pins rated at ±15 kV HBM air discharge. The component is housed in an 8-lead SOIC package.

Drivers, Receivers, Transceivers Feature Summary

• Type 2 receiver with 100 mV threshold offset for open-circuit and bus-idle fail-safe
• Enhanced ESD protection on bus pins up to ±15 kV HBM air discharge
• Glitch-free power-up and power-down on M-LVDS bus
• Common-mode range of −1 V to +3.4 V allowing communication with ground noise

Drivers, Receivers, Transceivers Applications

• Backplane and cable multipoint data transmission
• Multipoint clock distribution
• Low power, high speed alternative to shorter RS-485 links
• Networking and wireless base station infrastructure

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ordering suffix RL7 corresponds to the reel packaging configuration required for your assembly line. Confirm that the 8-lead SOIC package dimensions align with your PCB footprint constraints. Ensure the supply voltage remains within the specified 3.0 V to 3.6 V range during operation to maintain signal integrity and compliance with the TIA/EIA-899 standard.

Drivers, Receivers, Transceivers Selection Notes

Select this component when a half-duplex M-LVDS interface with robust fault detection is required. The Type 2 receiver is suitable for applications needing guaranteed output states during idle or open-circuit conditions. Compare against Type 1 receivers if hysteresis is preferred over threshold offsets. Verify that the 200 Mbps data rate meets the system bandwidth requirements.

Drivers, Receivers, Transceivers Part Context

This part belongs to the ADN469xE series of multipoint LVDS transceivers from Analog Devices. It shares the same core driver architecture as the ADN4691E but differs in receiver type and duplex mode. The ADN4696E specifically provides half-duplex operation with Type 2 receiver characteristics, distinguishing it from the full-duplex ADN4693E and the Type 1 ADN4691E.

Drivers, Receivers, Transceivers Replacement Considerations

The ADN4691EBRZ-RL7 serves as a direct functional substitute within the same family, differing only in receiver type (Type 1 vs. Type 2). Both share identical pinouts, package types, and electrical specifications except for the receiver threshold behavior. Verify that the application logic can accommodate the change from fail-safe offset to hysteresis-based detection.