ADP-2-9+

RF Power Dividers/Splitters Overview

The ADP-2-9+ is a surface-mount RF power splitter/combiner from Mini-Circuits, designed for signal distribution in the 200 MHz to 900 MHz frequency range. It features a 6-SMD, flat lead package and operates at a standard 50 Ohm impedance. Key electrical specifications include a maximum insertion loss of 0.4 dB and a minimum isolation of 20 dB. The device maintains a maximum amplitude imbalance of 2 degrees, ensuring consistent signal performance across its operational bandwidth.

RF Power Dividers/Splitters Feature Summary

• Surface-mount construction for automated assembly
• Broadband operation covering 200 MHz to 900 MHz
• Low insertion loss characteristics
• High port-to-port isolation

RF Power Dividers/Splitters Applications

• RF signal distribution networks
• Balanced mixer local oscillator feeds
• Antenna array feed systems
• Test and measurement instrumentation

RF Power Dividers/Splitters Procurement Notes

Verify the specific datasheet revision when ordering, as Mini-Circuits may update pinout or mechanical dimensions over time. Confirm that the 6-SMD flat lead package aligns with your PCB footprint requirements. Ensure the operating frequency range of 200 MHz to 900 MHz meets your system's spectral needs before finalizing procurement.

RF Power Dividers/Splitters Selection Notes

Select this component when a compact, broadband solution is required for splitting or combining signals between 200 MHz and 900 MHz. The low insertion loss of 0.4 dB makes it suitable for applications where signal integrity is critical. Consider the 6-SMD package for space-constrained designs requiring surface-mount technology compatibility.

RF Power Dividers/Splitters Part Context

This part belongs to Mini-Circuits' ADP series of power splitters and combiners. These components are widely used in RF and microwave circuits for dividing input signals into equal outputs or combining multiple inputs. The '+' suffix indicates compliance with current environmental standards, such as RoHS.

RF Power Dividers/Splitters Replacement Considerations

Direct substitutes within the same family include other ADP series variants with similar frequency ranges. Verify that any replacement maintains the 6-SMD flat lead package and 50 Ohm impedance. Cross-reference specific isolation and insertion loss values to ensure equivalent performance in your circuit design.