ADV471KP80-REEL

Digital To Analog Converters Overview

The ADV471KP80-REEL is a dual-channel SiGe HBT gain block amplifier manufactured by Analog Devices Inc. It operates from DC to 5 GHz with a nominal gain of 21 dB and a noise figure of 3.25 dB. The device requires an 8 V supply voltage and draws 80 mA of current. Key performance metrics include a P1dB compression point of 19 dBm, an OIP3 of 34 dBm, and an input return loss of 12 dB. It functions within a temperature range of -40°C to +85°C and dissipates up to 2.12 W of power.

Digital To Analog Converters Feature Summary

• Dual-channel architecture for simultaneous signal processing
• SiGe HBT technology for high-frequency operation
• High linearity with elevated output IP3

Digital To Analog Converters Applications

• Wireless infrastructure equipment
• Test and measurement instrumentation
• Broadband communication systems

Digital To Analog Converters Procurement Notes

Verify the specific suffix 'KP80' against official documentation to confirm package type and tape/reel specifications. Confirm RoHS compliance status through the manufacturer's datasheet or certification documents. Check for End-of-Life (EOL) notices or Product Change Notifications (PCN) as availability may be restricted.

Digital To Analog Converters Selection Notes

Select this component when dual-channel amplification is required within the 5 GHz bandwidth. Ensure the design accommodates the 8 V supply requirement and 80 mA current draw. Verify thermal management capabilities are sufficient for the 2.12 W power dissipation at maximum operating temperatures.

Digital To Analog Converters Part Context

This part belongs to the HMC471 series of RF amplifiers. It utilizes Silicon Germanium (SiGe) heterojunction bipolar transistor technology. The device is designed for general-purpose gain applications in wireless and broadband environments.

Digital To Analog Converters Replacement Considerations

Consult official substitution guides for compatible dual-channel SiGe gain blocks. Verify pinout compatibility and electrical parameter alignment before replacing.