SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
The ADV7340BSTZ is a high-speed multiformat video encoder featuring six 12-bit Noise Shaped Video (NSV) digital-to-analog converters. It supports standard definition, enhanced definition, and high definition video formats including NTSC, PAL, SMPTE 274M, and SMPTE 296M. The device accepts up to a 30-bit pixel input via SDR or DDR interfaces and provides composite, S-Video, component YPrPb, and RGB outputs. Operating from a 3.3 V analog supply and 1.8 V digital supply, it includes integrated timing generators, test patterns, and Macrovision copy protection.
Verify the specific ordering suffix against the manufacturer's current datasheet revision to ensure package compatibility and temperature range alignment. Confirm that the required voltage levels match the specified 3.3 V analog and 1.8 V digital operation parameters before finalizing procurement orders.
Select this component when designing systems requiring simultaneous standard and high-definition video encoding. Ensure the host processor supports the required 30-bit parallel interface or DDR configuration. Verify that the system design accommodates the specified 3.3 V and 1.8 V dual-supply architecture for optimal performance.
This part belongs to the ADV7340/ADV7341 family of multiformat video encoders manufactured by Analog Devices Inc. The ADV7340BSTZ specifically denotes the version packaged in a 64-lead LQFP format designed for industrial temperature ranges. It serves as a direct hardware implementation for converting digital video streams into various analog broadcast standards.
The ADV7341 is a pin-compatible alternative within the same family. Verify if the specific feature set differences between the ADV7340 and ADV7341 models align with the application requirements before substituting.
The device supports 16× oversampling for standard definition, 8× for enhanced definition, and 4× for high definition video formats.
Yes, the device supports embedded EAV/SAV timing codes along with external video synchronization signals.
The maximum DAC output current is 37 mA under full-drive conditions with a 510 Ω setting resistor.