AE930L8812

Overview

The AE930L8812 is a low-pass RF filter module manufactured by Anatech Electronics Inc. It features a cutoff frequency of 930 MHz and operates within a bandwidth range of 0.3 to 1000 MHz. The component provides attenuation greater than 100 dB at frequencies between 1830 and 5000 MHz, with insertion loss less than 0.3 dB in the passband. At 20 MHz, it offers greater than 14 dB attenuation, while at 15.8 MHz, insertion loss remains below 2.0 dB. This LC-based filter is designed for radio frequency applications requiring precise signal filtering.

Feature Summary

• Low-pass filtering capability with a 930 MHz cutoff frequency
• High attenuation exceeding 100 dB in the stopband from 1830 to 5000 MHz
• Low insertion loss under 0.3 dB within the operational passband

Applications

• Radio frequency signal processing
• Communication system interference suppression
• RF module integration

Procurement Notes

Verify the specific suffix (e.g., -4310-O) against official manufacturer documentation to ensure correct configuration. Confirm RoHS compliance status through current datasheets. Check lead-free certification requirements for your assembly process. Ensure the package type matches your mechanical constraints. Validate electrical parameters against the latest Anatech Electronics Inc. specifications before procurement.

Selection Notes

Select this component when a 930 MHz low-pass characteristic is required. Consider the high stopband attenuation for noise-sensitive environments. Evaluate the low insertion loss for efficiency-critical paths. Compare performance metrics against alternative filters if wider bandwidths are needed. Ensure compatibility with existing RF circuit designs.

Part Context

This part belongs to the Anatech Electronics Inc. RF Filters category. It is an LC low-pass filter module. The series includes variants with different suffixes. These components are used in radio frequency applications. The manufacturer specializes in passive RF components.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Verify direct replacements only through official Anatech Electronics Inc. channels or authorized distributors. Cross-referencing requires matching cutoff frequency and attenuation specs.