AFS3-00102650-42-8P-4

RF Amplifiers Overview

The AFS3-00102650-42-8P-4 is a general purpose RF amplifier module manufactured by L3 Narda-MITEQ. It operates within a frequency range of 100 MHz to 26.5 GHz, covering GPS and other wideband applications. The device provides a gain of 42 dB with an output power at 1 dB compression (P1dB) of 8 dBm. Key electrical specifications include a noise figure of 2.5 dB and a supply voltage requirement of 15 V. The unit draws a supply current of 150 mA and is housed in a standardized module package.

RF Amplifiers Feature Summary

• Wideband operation spanning from 100 MHz to 26.5 GHz
• High gain capability suitable for signal amplification
• Low noise figure for improved signal integrity
• Integrated module design for simplified integration

RF Amplifiers Applications

• GPS signal processing systems
• General purpose RF amplification
• Wideband communication infrastructure
• Test and measurement equipment

RF Amplifiers Procurement Notes

Verify the exact part number suffix against official L3 Narda-MITEQ documentation to ensure correct pinout and performance characteristics. Confirm that the 15V supply requirement aligns with your system power architecture. Check for RoHS compliance status if required by your manufacturing standards. Ensure thermal management solutions are adequate for the module's power dissipation during continuous operation.

RF Amplifiers Selection Notes

Select this component when a wide frequency coverage up to 26.5 GHz is required alongside moderate output power. The 42 dB gain makes it suitable for low-level signal boosting. Consider the 15V supply constraint during power budget planning. Compare noise figures against alternative modules if sensitivity is critical. Verify mechanical dimensions fit the intended enclosure or PCB layout constraints.

RF Amplifiers Part Context

This module belongs to the AFS3 series of RF amplifiers from L3 Narda-MITEQ, designed for versatile microwave and millimeter-wave applications. The series typically offers modular construction for ease of integration into larger RF chains. Similar models in the lineup may vary in frequency range, gain, or output power, requiring careful datasheet review for specific operational requirements.

RF Amplifiers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Consult L3 Narda-MITEQ technical support for direct replacements or cross-references. Ensure any alternative component matches the 100 MHz to 26.5 GHz frequency range and 15V supply requirement.

RF Amplifiers FAQ

What is the operating frequency range of the AFS3-00102650-42-8P-4?

The operating frequency range is 100 MHz to 26.5 GHz.

What is the supply voltage requirement for this RF amplifier module?

The module requires a 15 V DC supply voltage.

What is the typical noise figure of this component?

The typical noise figure is 2.5 dB.